MINNESOTA SPECIAL ENGINEER BOILER
LICENSE PRACTICE (2026) EXAM QUESTIONS
AND ALL CORRECT ANSWERS 100% SOLVED
AND GUARANTEED SUCCESS!!
Save
Terms in this set (60)
For the purpose of rating boiler 10 Sq. Ft. Heating Surface
horsepower for an Engineers
License only, how many square feet
of boiler surface shall be equivalent
to one boiler horsepower on a
boiler?
What is meant by the term "Low Boilers operating at a steam or other vapor
Pressure Boiler"? pressure of 15psig or less, or a hot water or other
liquid boiler in which the pressure does not
exceed 160 psig or a temperature of 250 degrees
F.
A person holding a current State of High and Low pressure boilers not to exceed a
Minnesota Special Engineers total of 50 boiler horsepower, or a shift engineer
License could be in charge of, or a in a 100 horsepower plant.
shift engineer in what size plant(s)?
Special Engineer may serve as an In any plant regardless of size under the direct
apprentice of what size water/liquid supervision of a properly licensed engineer.
or steam/vapor boiler?
, The purpose of low water cut out Shut off the burner when a low water condition
on a steam or hot water boiler is to exists.
what?
The valve or valves that must relieve Safety valve and/or an ASME approved safety
all excess pressure on a steam or relief valve.
hot water boiler are what?
A Tri indicator could be found on a: Hot water boiler
A tri indicator would inform the The TEMPERATURE of the water, the PRESSURE
boiler operator of what? of the water in PSIG, and the ALTITUDE of water
in feet.
What is the destructive force in a The instant release of energy stored in the water
steam or hot water boiler as heat.
explosion?
An ASME approved safety relieve Steam first then hot water.
calve used on a hot water boiler is
tested at the factory on what?
Some of the things you could find Low water cut off, safety valve or safety relief
on a steam boiler (or hot water valve, pressure gauge.
boiler) are what?
What devices would only be found Steam pressure gauge, tricocks, Pressuretrols
on a steam boiler?
An expansion tank or compression Hot water boiler
tank would be used in what?
What is the purpose of the To provide for expansion and contraction of the
expansion tank? water volume as its temperature varies.
LICENSE PRACTICE (2026) EXAM QUESTIONS
AND ALL CORRECT ANSWERS 100% SOLVED
AND GUARANTEED SUCCESS!!
Save
Terms in this set (60)
For the purpose of rating boiler 10 Sq. Ft. Heating Surface
horsepower for an Engineers
License only, how many square feet
of boiler surface shall be equivalent
to one boiler horsepower on a
boiler?
What is meant by the term "Low Boilers operating at a steam or other vapor
Pressure Boiler"? pressure of 15psig or less, or a hot water or other
liquid boiler in which the pressure does not
exceed 160 psig or a temperature of 250 degrees
F.
A person holding a current State of High and Low pressure boilers not to exceed a
Minnesota Special Engineers total of 50 boiler horsepower, or a shift engineer
License could be in charge of, or a in a 100 horsepower plant.
shift engineer in what size plant(s)?
Special Engineer may serve as an In any plant regardless of size under the direct
apprentice of what size water/liquid supervision of a properly licensed engineer.
or steam/vapor boiler?
, The purpose of low water cut out Shut off the burner when a low water condition
on a steam or hot water boiler is to exists.
what?
The valve or valves that must relieve Safety valve and/or an ASME approved safety
all excess pressure on a steam or relief valve.
hot water boiler are what?
A Tri indicator could be found on a: Hot water boiler
A tri indicator would inform the The TEMPERATURE of the water, the PRESSURE
boiler operator of what? of the water in PSIG, and the ALTITUDE of water
in feet.
What is the destructive force in a The instant release of energy stored in the water
steam or hot water boiler as heat.
explosion?
An ASME approved safety relieve Steam first then hot water.
calve used on a hot water boiler is
tested at the factory on what?
Some of the things you could find Low water cut off, safety valve or safety relief
on a steam boiler (or hot water valve, pressure gauge.
boiler) are what?
What devices would only be found Steam pressure gauge, tricocks, Pressuretrols
on a steam boiler?
An expansion tank or compression Hot water boiler
tank would be used in what?
What is the purpose of the To provide for expansion and contraction of the
expansion tank? water volume as its temperature varies.
