Comprehensive Real Exam Questions And Verified Answers (100% Correct
Answers) Already Graded A+ | Guaranteed Success | Newest Exam | Just
Released!!
the heating mode, which way is the liquid refrigerant inside the liquid line
flowing?
indoor to outdoor
This component of a heat pump system holds some of the charge of the
system out of circulation during the heating cycle.
charge compensator
In the cooling mode, the refrigerant is metered through the expansion device
at the
_ ______ coil.
indoor coil
true or false When a vapor refrigerant is at its saturation point, adding more
heat will cause the refrigerant to condense.
false
The temperature of the air surrounding an object is known as the _______________
temperature.
ambient
,The four-way valve (reversing valve) will send the hot discharge gas to the
indoor coil in the __
heating mode
In the cooling mode, the refrigerant bypasses the expansion device at the
____________ coil.
outdoor coil
Refrigeration can be described as ___
the process of removing heat from a place where it is not wanted to a
place where it makes little or no difference
This component of a heat pump system protects the compressor from
liquid migration during the off-cycle.
Crankcase Heater
, This component of a heat pump system protects the compressor from
liquid slugging during the run-cycle
Suction Line Accumulator
At a given pressure, if you lower the temperature of a substance below the
saturation point, you have it.
subcool
Which component switches the heat pump refrigeration cycle from one mode
to the other?
Reversing Valve
The metering device that can control the evaporator superheat is called the:
Thermostatic Expansion Valve