1|Page
Massachusetts Sprinkler Fitter Licensing Exam
ACTUAL VERIFIED EXAM COMPLETE QUESTIONS
AND CORRECT ANSWERS LATEST UPDATE THIS
YEAR.pdf||NEWEST EXAM!!!
Flexible couplings shall be installed on risers within_____
inches above and _____ inches below the floor in multi-
story buildings. - Answer-12in and 24in
For ESFR sprinklers, the clearance between the deflector
and the top of storage shall be ____ inches or greater -
Answer-36in
For extra hazard occupancies, the maximum distance
between sprinklers shall not exceed ______ feet - Answer-
12ft
Hangers shall be designed to support _______ times the
weight of water-filled pipe plus ________ at each point of
piping support. - Answer-5 and 250
,2|Page
Hose connections and hose stations shall be unobstructed
and shall be located not less than ______ nor more than
______ above the floor.
Answers - Answer-36in, 60in
How high can storage be before it is considered high-piled
storage? - Answer-12ft
How shall the sprinkler head protecting the dry pipe valve
enclosure be fed? - Answer-From the dry side of the
system
In residential applications, fire department connections are
required to be a minimum of _______ in size. - Answer-1
1/2"
Is the use of reconditioned valves and devices as
replacement equipment in existing systems allowed? -
Answer-Yes
Joints for the connection of copper pipe an fittings on dry
and preaction systems shall be brazed. - Answer-True
, 3|Page
Lateral sway bracing shall be spaced at a minimum of
__________ feet on center on all feed and cross mains
regardless of size and on all piping 2 1/2" and larger -
Answer-40ft
Class 1 commodity is more combustible then class 3 -
Answer-False
All holes for lag screws shall be pre-drilled __________
inch less in diameter than the max. root diameter of the
lag screw thread. - Answer-1/8in
Coach screws shall not be used for support of pipes larger
than ________ inch in diameter. - Answer-4
Distance between supports on a riser shall not exceed
_________ feet. - Answer-25ft
Fire department connections shall be installed so that they
are located not less than ______ nor more than ______
above the level of the adjoining ground, sidewalk, or grade
surface. - Answer-18in , 48in
Lateral sway bracing shall not apply to pipes individually
supported by rods less than ______ inches long measured
Massachusetts Sprinkler Fitter Licensing Exam
ACTUAL VERIFIED EXAM COMPLETE QUESTIONS
AND CORRECT ANSWERS LATEST UPDATE THIS
YEAR.pdf||NEWEST EXAM!!!
Flexible couplings shall be installed on risers within_____
inches above and _____ inches below the floor in multi-
story buildings. - Answer-12in and 24in
For ESFR sprinklers, the clearance between the deflector
and the top of storage shall be ____ inches or greater -
Answer-36in
For extra hazard occupancies, the maximum distance
between sprinklers shall not exceed ______ feet - Answer-
12ft
Hangers shall be designed to support _______ times the
weight of water-filled pipe plus ________ at each point of
piping support. - Answer-5 and 250
,2|Page
Hose connections and hose stations shall be unobstructed
and shall be located not less than ______ nor more than
______ above the floor.
Answers - Answer-36in, 60in
How high can storage be before it is considered high-piled
storage? - Answer-12ft
How shall the sprinkler head protecting the dry pipe valve
enclosure be fed? - Answer-From the dry side of the
system
In residential applications, fire department connections are
required to be a minimum of _______ in size. - Answer-1
1/2"
Is the use of reconditioned valves and devices as
replacement equipment in existing systems allowed? -
Answer-Yes
Joints for the connection of copper pipe an fittings on dry
and preaction systems shall be brazed. - Answer-True
, 3|Page
Lateral sway bracing shall be spaced at a minimum of
__________ feet on center on all feed and cross mains
regardless of size and on all piping 2 1/2" and larger -
Answer-40ft
Class 1 commodity is more combustible then class 3 -
Answer-False
All holes for lag screws shall be pre-drilled __________
inch less in diameter than the max. root diameter of the
lag screw thread. - Answer-1/8in
Coach screws shall not be used for support of pipes larger
than ________ inch in diameter. - Answer-4
Distance between supports on a riser shall not exceed
_________ feet. - Answer-25ft
Fire department connections shall be installed so that they
are located not less than ______ nor more than ______
above the level of the adjoining ground, sidewalk, or grade
surface. - Answer-18in , 48in
Lateral sway bracing shall not apply to pipes individually
supported by rods less than ______ inches long measured
