Endeavor Air Checklist F/O Triggers Exam 2025 Newest Exam Questions And Correct Answers | Passed

Endeavor Air Checklist F/O Triggers Exam 2025 Newest Exam Questions And Correct Answers | Passed Once Performance Data Is Received - Answer- 1. Input V1, VR, V2, and VFTO Speeds 2. Speed bug set at V2 + 10 3. Set stabilizer trim to ACARS T/O DATA TRIM setting 4. Input FLEX Temperature (IF applicable) on FMS PERF MENU Page 5. Verify N1 Setting When Ground Crew is ready for Pushback or Engine Start at Gate - Answer- 1. Doors closed 2. Verify cabin is secured for pushback 3. Flight Deck Door closed and locked 4. Crew Escape Hatch Closed 5. APU on, AC Power Checked 6. L and/or R BOOST PUMP switch-lights pressed in, lights on 7. ATC Selector 1 or 2 set to pilot flying Once Pushback Checklist is Complete - Answer- When requested by the captain, call for pushback or engine start clearance When cleared and ready to start - Answer- Silently Complete the Following: 1. L or R Engine START switch-light press in 2. Start chronometer 3. At 20% N2 L or R Thrust Lever to IDLE After Starting Engine(s) - Answer- 1. Generators AUTO 2. Fuel PUMPS Set 3. Bleeds air/air conditioning panel set 4. APU as required 5. LH and/or RH Cowl Anti-Ice as required 6. LH and RH Probes switches on 7. Electrics AC and DC synoptic pages select When wave-off received (or chocks removed at hard stand location) - Answer- 1. Receive and return the marshalling agents taxi salute 2. Complete the after start checklist FLAPS ____ - Answer- Select flaps as directed After Pushback, when workload and conditions permit - Answer- Flight Controls Check TAXI CHECKLIST - Answer- Accomplish Taxi Checklist When Ready to Start - Answer- 1. L (R) BOOST PUMP switchlights Pressed Armed 2. Engine Start Procedure Accomplish 3. Gen 1 (2) Auto 4. Bleeds and Packs Set 5. Electrics Checked (AC/DC Synoptic Pages) When Number 3 for Departure or Approximately 5 Minutes prior to departure: - Answer- 1. Notify the flight attendants to finalize preparations for takeoff with the following PA, "FLIGHT ATTENDANTS, PLEASE PREPARE THE CABIN FOR DEPARTURE" 2. Receive the chime from the flight attendants as a signal that they are seated and ready for departure 3. Runway Position, Departure, First Fix Verify 4. The First Officer Will Display the ACARS T/O DATA page for the departure runway After Climbing Through Approximately 10,000ft AFE - Answer- SEAT BELTS switch (CA cycles twice) When Conditions Permit - Answer- 1. SEATBELT Sign Switch AUTO 2. Ensure PA is made advising passengers to keep seat belts fastened while seated Approaching FL 180 - Answer- Altimeters STD CLIMB CHECKLIST - Answer- Accomplish Climb Checklist At IAS/MACH transition altitude for climb schedule - Answer- Verify airspeed reference is displaying Mach indication Approaching FL 290 - Answer- 1. Complete RVSM Check 2. Verbalize RVSM Check Complete after successful check After FMS Data has Been Entered - Answer- FMS Data Verify At Top of Descent or Approximately 15 minutes prior to landing - Answer- 1. Contact station operations via ACARS or radio with ETA, and any special needs. Station will respond with gate assignment 2. Notify the flight attendants with a PA that includes "FLIGHT ATTENDANTS PLEASE PREPARE THE CABIN FOR ARRIVAL" 3. Pressurization Panel Set 4. Confirm LDG ELEV set to landing airport field elevation At FL180 or reaching TOD, whichever occurs later: - Answer- Accomplish descent checklist When arrival, approach, or runway changes prior to landing - Answer- 1. FMS data must be modified 2. After updating/verifying any changed items, complete the runway change boxed items for the Descent and Approach checklists and their associated procedures Before Descending through approx 10,000ft AFE - Answer- 1. Flight and Nav instruments set - Verify correct arrival and approach selected in FMS - VHF NAV frequency set At Approximately 10,000ft AFE - Answer- SEATBELTS Switch cycled twice by CA APPROACH CHECKLIST - Answer- Accomplish APP checklist Approximately 3 miles from FAF or abeam touchdown point - Answer- GEAR DOWN: - Select landing gear lever down - Chime the cabin - Arm the thrust reversers FLAPS 30 - Select Flaps 30 FLAPS 45, LANDING CHECKLIST - Select flaps 45 - Landing Checklist Accomplish When clear of the active runway and workload and conditions permit: - Answer- 1. Weather Radar Off 2. Flaps Up 3. Anti-Ice As Required 4. CONT Ignition switchlight pressed out, light off 5. APU and Bleeds as required 6. Windshield heat off if OAT is 30 C or above After engine 2 min cool down requirements have been met and single engine taxi is desired: ENGINE SHUTDOWN - Answer- 1. L or R BOOST PUMP Switchlight Pressed Out 2. L or R Thrust Lever Shut Off 30-60 seconds or three airplane lengths from stopping at the gate - Answer- Cowl Anti-Ice Off