CSA W59 WELDING INSPECTOR LEVEL 1
CERTIFICATION ASSESSMENT MOCK TEST
FULL QUESTIONS AND ANSWERS VERIFIED
COMPLETE
●● In CSA W47.1, how many welder qualification classifications are
there?
Answer: Five
●● Which of the following best defines the term "essential variables"?
Answer: Parameters that have significant effect on the weld properties
when varied outside the given ranges
●● How would an inspector confirm a welder is qualified under CSA
W47.1?
Answer: Qualified welders are issued an identification card.
●● Which of the following statements is true regarding prequalification
in accordance with CSA W59 and W47.1?
Answer: Prequalified joint welding procedures do not require approval
by CWB because they are prequalified. - WRONG
Prequalified joint welding procedures do not require Canadian Welding
Bureau approval if they are tested. - WRONG...Prequalified joint
, welding procedures do not require testing but require a written
procedure approved by CWB.
●● Should a CSA W47.1 Weld Procedure Data Sheet include weld
cleaning procedures?
Answer: Yes, weld cleaning procedures are part of a WPDS
●● How can an inspector verify electrode holding oven temperatures?
Answer: Temperature-indicating crayon
●● For ASME work, a WPS is required. Which of the following is NOT
included in a welding procedure specification?
Answer: Welder's qualification
●● Incorrect heat input control when welding stainless steels can result
in:
Answer: heat tinting.
●● Why is it critical to adhere to a proven welding procedure?
Answer: To ensure the welding operation is consistent and can produce
sound weldments.
●● Which of the following is true with regard to sampling inspection
(e.g., 10% of butt joints to be radiographed)?
CERTIFICATION ASSESSMENT MOCK TEST
FULL QUESTIONS AND ANSWERS VERIFIED
COMPLETE
●● In CSA W47.1, how many welder qualification classifications are
there?
Answer: Five
●● Which of the following best defines the term "essential variables"?
Answer: Parameters that have significant effect on the weld properties
when varied outside the given ranges
●● How would an inspector confirm a welder is qualified under CSA
W47.1?
Answer: Qualified welders are issued an identification card.
●● Which of the following statements is true regarding prequalification
in accordance with CSA W59 and W47.1?
Answer: Prequalified joint welding procedures do not require approval
by CWB because they are prequalified. - WRONG
Prequalified joint welding procedures do not require Canadian Welding
Bureau approval if they are tested. - WRONG...Prequalified joint
, welding procedures do not require testing but require a written
procedure approved by CWB.
●● Should a CSA W47.1 Weld Procedure Data Sheet include weld
cleaning procedures?
Answer: Yes, weld cleaning procedures are part of a WPDS
●● How can an inspector verify electrode holding oven temperatures?
Answer: Temperature-indicating crayon
●● For ASME work, a WPS is required. Which of the following is NOT
included in a welding procedure specification?
Answer: Welder's qualification
●● Incorrect heat input control when welding stainless steels can result
in:
Answer: heat tinting.
●● Why is it critical to adhere to a proven welding procedure?
Answer: To ensure the welding operation is consistent and can produce
sound weldments.
●● Which of the following is true with regard to sampling inspection
(e.g., 10% of butt joints to be radiographed)?
