RANGE SAFETY COURSE PRACTICE SET
2026 ASSESSMENT QUESTIONS
SOLUTIONS ACCURATE A+
◉ The design of a danger zone is intended to prevent injury to
personnel and _______.
Answer: Damage to property by identifying hazardous boundaries of
ricochets and fragmentation associated with live-fire training.
◉ You are planning an exercise that will include an airstrike on a
static target. What type of danger zone is needed for of exercise?
Answer: Surface Danger Zone
◉ Which area or location is represented by the number "2" in the
batwing SDZ shown here? (image not included)
Answer: Area A
◉ Which area or distance is represented by the number "3" in the
cone SDZ shown here?
Answer: Ricochet Area
, ◉ Your unite is conducting a 5.56mm live-fire exercise using M855
ball ammunition. What is the correct Distance X for the SDZ?
Answer: 3,437m
◉ Which of the SDZ's shown here is appropriate for conducting a
small arms training exercise when firing .45 caliber rounds into a
concrete impact are?
Answer: -Dist.X= 1,690m
-Dist.Y= 1,111m
-Angle Q = 30.77 degrees
-Dist.W = 290m
-Angle P = 54.74 degree
-SDZ "A"
◉ You are planning for a range event and configured the SDZ for a
single firing point and a single fixed target. Now, the OIC has
modified the exercise to include multiple targets. Which SDZ shown
here is appropriate based on the OIC's revised requirements.
Answer: SDZ "C"
◉ The five steps of the Risk Management process include: identify
hazards, assess hazards, make risk decisions, implement controls
and _______?
Answer: Supervise
2026 ASSESSMENT QUESTIONS
SOLUTIONS ACCURATE A+
◉ The design of a danger zone is intended to prevent injury to
personnel and _______.
Answer: Damage to property by identifying hazardous boundaries of
ricochets and fragmentation associated with live-fire training.
◉ You are planning an exercise that will include an airstrike on a
static target. What type of danger zone is needed for of exercise?
Answer: Surface Danger Zone
◉ Which area or location is represented by the number "2" in the
batwing SDZ shown here? (image not included)
Answer: Area A
◉ Which area or distance is represented by the number "3" in the
cone SDZ shown here?
Answer: Ricochet Area
, ◉ Your unite is conducting a 5.56mm live-fire exercise using M855
ball ammunition. What is the correct Distance X for the SDZ?
Answer: 3,437m
◉ Which of the SDZ's shown here is appropriate for conducting a
small arms training exercise when firing .45 caliber rounds into a
concrete impact are?
Answer: -Dist.X= 1,690m
-Dist.Y= 1,111m
-Angle Q = 30.77 degrees
-Dist.W = 290m
-Angle P = 54.74 degree
-SDZ "A"
◉ You are planning for a range event and configured the SDZ for a
single firing point and a single fixed target. Now, the OIC has
modified the exercise to include multiple targets. Which SDZ shown
here is appropriate based on the OIC's revised requirements.
Answer: SDZ "C"
◉ The five steps of the Risk Management process include: identify
hazards, assess hazards, make risk decisions, implement controls
and _______?
Answer: Supervise
