NCCER-OSHA SCAFFOLD SG (ACTUAL 2026) QUESTIONS AND
VERIFIED ANSWERS A+ SCORE REVIEW GUARANTEED PASS
What should be used to brace tubular welded frame scaffolds?
Cross bracing, diagonal bracing, or both
Adjustings screw jacks are used to
Level the scaffold
Any scaffolding, including accessories such as braces, trusses, and
ladders, damaged or weakened from any cause should be?
Repaired or replaced immediately
Drawing and specifications for all frame scaffolds over how many
feet i height above the base plates must be designed by a registered
professional engineer?
125
,The component that distributes the scaffold's leg load over a larger
area is a
Base plate
The hoisting are is rated for 75 pounds; the pulley is rated for 100
pounds; and the rope is rated for 250 pounds, what is the maximum
load that can be lifted/
75 pounds
The midrail should withstand a minimum pressure of how many
pounds?
150
A system scaffold should be plumbed and leveled after
Each ring or wrap is completed
What is the best power to use?
Air
, Side brackets, hoist arms, and cantilevered platforms on a scaffold
may result in
Overturning/tipping
Osha defines bearers on a scaffold as the?
Horizontal tubes upon which the scaffold platform rests
Where there is a danger of falling objects, toe boards on scaffolds
are required when the working platform is how many feet above
lower levels?
10
On a light duty tube and clamp scaffold, the scaffold post should not
exceed
4' x 10'
VERIFIED ANSWERS A+ SCORE REVIEW GUARANTEED PASS
What should be used to brace tubular welded frame scaffolds?
Cross bracing, diagonal bracing, or both
Adjustings screw jacks are used to
Level the scaffold
Any scaffolding, including accessories such as braces, trusses, and
ladders, damaged or weakened from any cause should be?
Repaired or replaced immediately
Drawing and specifications for all frame scaffolds over how many
feet i height above the base plates must be designed by a registered
professional engineer?
125
,The component that distributes the scaffold's leg load over a larger
area is a
Base plate
The hoisting are is rated for 75 pounds; the pulley is rated for 100
pounds; and the rope is rated for 250 pounds, what is the maximum
load that can be lifted/
75 pounds
The midrail should withstand a minimum pressure of how many
pounds?
150
A system scaffold should be plumbed and leveled after
Each ring or wrap is completed
What is the best power to use?
Air
, Side brackets, hoist arms, and cantilevered platforms on a scaffold
may result in
Overturning/tipping
Osha defines bearers on a scaffold as the?
Horizontal tubes upon which the scaffold platform rests
Where there is a danger of falling objects, toe boards on scaffolds
are required when the working platform is how many feet above
lower levels?
10
On a light duty tube and clamp scaffold, the scaffold post should not
exceed
4' x 10'
