FIREFIGHTER 1 COMPREHENSIVE STUDY GUIDE 2026 QUESTIONS WITH SOLUTIONS GRADED A+

FIREFIGHTER 1 PRACTICE
EXAMINATION 2026 QUESTIONS WITH
ANSWERS GUARANTEED TO PASS.


⩥ For an area to qualify as a light hazard, the majority of materials
must meet one requirements. One of those is that they must:
A. be UL listed
B. have ignition temperatures in excess of 451F
C. be necessary for the work of the area
D. be noncombustible. Ans- D. be noncombustible


⩥ What type of listening is required by a telecommunicator to draw
out all the necessary information from a caller who may be excited,
confused, or dealing with a language barrier?
A. Presumptive
B. Active
C. Selective
D. Modal. Ans- B. Active


⩥ After a roof has been opened up, the firefighter must:
A. remove any natural roof openings
B. make another opening on the opposite side of the pitched roof
C. ensure the ceiling below the cut is opened

,D. direct a hose line into the opening. Ans- C. ensure the ceiling
below the cut is opened


⩥ How are flammability limits and explosive limits related?
A. Explosive limits are used to calculate flammability limits
B. The two terms are neither mathematically nor conceptually related.
C. They are interchangeable terms meaning the same thing
D. Flammability limits are used to calculate explosive limits. Ans- C.
They are interchangeable terms meaning the same thing


⩥ A load the engineer planned for, or anticipated, in the building
design is the definition of a(n) __________ load.
A. dead
B. concentrated
C. impact
D. design. Ans- D. design


⩥ What type of standpipe is intended for fire department use only?
A. Group 5
B. Type II
C. Class I
D. Level D. Ans- B. Type II


⩥ What types of locking devices usually ARE NOT detected by the
forcible entry team?
A. Mortise locks

,B. Auxiliary locking devices
C. Padlocks
D. Rim Locks. Ans- B. Auxiliary locking devices


⩥ Which of the following IS TRUE regarding hoisting tools and
equipment?
A. Use edge roller over sharp edges to prevent physical damage to
rope
B. Fire extinguishers and SCBS should not be hoisted
C. When working with heights, use teams to ensure safety
D. Use hand over hand method to control rope when hoisting. Ans- B.
Fire extinguishers and SCBS should not be hoisted


⩥ The leading killer(s) of people in homes during a fire is/are:
A. burns
B. carbon dioxide poisoning
C. smoke and toxic gases
D. slips and falls. Ans- C. smoke and toxic gases


⩥ How should an unconscious child be carried down a ladder?
A. Over one shoulder
B. Across the shoulders
C. Cradled across the rescuer's arms
D. Vertically, in the crook of one arm. Ans- C. Cradled across the
rescuer's arms

, ⩥ Which type of heat transfer is a major contributor to flashover?
A. Nuclear
B. Radiation
C. Conduction
D. Convection. Ans- D. Convection


⩥ Which of the following IS NOT one of the methods by which water
tenders unload?
A. Jet dumps to increase flow rate
B. Jet siphons to increase flow rate
C. Gravity dumping through large dump valves
D. Apparatus-mounted pumps that off-load the water. Ans- B. Jet
siphons to increase flow rate


⩥ Slab doors are constructed in two configurations:
A. ledge and framed
B. slab and panel
C. raised and flat
D. solid core and hollow core. Ans- D. solid core and hollow core


⩥ When ventilating a building, all of the following procedures can be
used by firefighters except __________ ventilation.
A. manual
B. forced
C. horizontal
D. vertical. Ans- A. manual