1. Which of the following terms is used to refer to the process that generates
sufficient quantities of burnable vapors to ignite in the presence of oxidizer
A- paralysis
B-fire coil
C- vapor pressure
D-flashpoint-
ANSWER -D
2. What type of reaction releases energy in the form of sometimes light
A- Kinetic
B- endothermic
C- potential
D- exothermic- ANSWER -D
3. What product of combustion causes The most fire deaths
A- carbon dioxide
B- toxic smoke
C- thermal energy
D- hydrogen sulfide- ANSWER -B
4. The ignition of unburned fire gases at the top of the compartment is known
as
A flash over
B combustion
C roll over
D smoke explosion- ANSWER -C
5. The potential chemical energy in fuel in fire behavior Is converted to
A mechanical energy
B thermal energy
C electrical energy
D sound energy- ANSWER -B
1/7
, BEFO Final Guaranteed Questions and Answers
6. The male threads on fire hydrant discharge outlets must
A- be connected to a 12 inch water main
B- Conform to those used by neighboring jurisdictions
C- be the ones used by the local fire department
D- have a 6 inch outlet- ANSWER -C
7. Fire hydrant markings can be used to designate
A-flow capacities
B-Distance from the next hydrant
C-Typical water pressure
D- Distance from nearest fire department- ANSWER -A
8. What kind of fire hydrants are designed for use in climates that have freezing
temperatures
A-cold-weather hydrant
B-dry barrel hydrant
C-Wet barrel hydrants
D-warm weather hydrants- ANSWER -B
9. Which means of moving water is used by most communities?
A -Combination system
B-Direct pumping system
C-pump less system
D-Gravity system- ANSWER -A
10. All hydrants must be opened and closed to prevent damage.
A.slowly
B.quickly
C.partially
D.at least twice- ANSWER -A
11. Which of the following is the best description of the main cause of injuries
suffered at fire stations and facilities
2/7