NACE CIP LEVEL 1 EXAM NEWEST 2026-2027
COMPLETE 100 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+
When applying Thermal spray coatings, the specification is most
likely to reference:
A. SSPC PA 2
B. NACE SP 0178
C. NACE SP 0188
D. SSPC-CS 23.00/AWS C2.23/NACE No.12
SSPC-CS 23.00/AWS C2.23/NACE No.12
What is the minimum recommended distance away from an edge that
an
inspector should take measurement with a dial-type magnetic pull-
off Dry Film Thickness (DFT) gauge?
A. 1 cm (.39in)
B. 2.5cm (1 in)
C. 6.35cm (2.5 in)
D. 2.5 millimeters (.10 in)
2.5cm (1 in)
,Polymerization is the process of:
A. monomers telegraphing
B. monomers joining together
C. All thermoplastic coatings
D. All organic coatings
monomers joining together
An exposed area of the substrate or previous coat of a conduction
coating material, often caused by poor application technique is
called:
A. cracking
B. sagging
C. holiday
D. checking
holiday
,Checking is:
A. an exposed area of the substrate or previous coat material,
caused by poor application technique
B. a fine crack in the surface of a coating that rarely reaches the
substrate
C. a very small hole in a coating caused when air or solvent is
trapped in porous film and then escapes
D. surface breaks in the film that often result from
grease or oil contamination and revel the substrate
a fine crack in the surface of a coating that rarely reaches the substrate
Inspection documentation is important because:
A. it is the only deliverable item provided by the inspector
B. owners use the documentation for a variety of purposes
C. (A) only
D. (A) and (B)
owners use the documentation for a variety of purposes
An inspector's personal log book should contain:
A. subjective comments regarding the application team
B. objective comments regarding the application work
C. no comments regarding the application team
D. the inspector's personal opinions of the application team
no comments regarding the application team
, You have just received your NACE CIP Level 1 Certification when
you are asked to supervise a team of uncertified field pipeline
inspectors. Your
FIRST preferred course of action is to:
A. accept the assignment without hesitation
B. advise the prospective employer that you cannot accept the
position
C. meet with the prospective employer to determine the scope of
your role
D. Review the NACE Attestation prior to making a decision
meet with the prospective employer to determine the scope of your
role
Good records can provide maintenance departments with detailed
information about ALL of the following EXCEPT
A. what items were coated
B. what materials were used
C. when the coating will be reapplied
D. how the item was coated
when the coating will be reapplied
COMPLETE 100 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+
When applying Thermal spray coatings, the specification is most
likely to reference:
A. SSPC PA 2
B. NACE SP 0178
C. NACE SP 0188
D. SSPC-CS 23.00/AWS C2.23/NACE No.12
SSPC-CS 23.00/AWS C2.23/NACE No.12
What is the minimum recommended distance away from an edge that
an
inspector should take measurement with a dial-type magnetic pull-
off Dry Film Thickness (DFT) gauge?
A. 1 cm (.39in)
B. 2.5cm (1 in)
C. 6.35cm (2.5 in)
D. 2.5 millimeters (.10 in)
2.5cm (1 in)
,Polymerization is the process of:
A. monomers telegraphing
B. monomers joining together
C. All thermoplastic coatings
D. All organic coatings
monomers joining together
An exposed area of the substrate or previous coat of a conduction
coating material, often caused by poor application technique is
called:
A. cracking
B. sagging
C. holiday
D. checking
holiday
,Checking is:
A. an exposed area of the substrate or previous coat material,
caused by poor application technique
B. a fine crack in the surface of a coating that rarely reaches the
substrate
C. a very small hole in a coating caused when air or solvent is
trapped in porous film and then escapes
D. surface breaks in the film that often result from
grease or oil contamination and revel the substrate
a fine crack in the surface of a coating that rarely reaches the substrate
Inspection documentation is important because:
A. it is the only deliverable item provided by the inspector
B. owners use the documentation for a variety of purposes
C. (A) only
D. (A) and (B)
owners use the documentation for a variety of purposes
An inspector's personal log book should contain:
A. subjective comments regarding the application team
B. objective comments regarding the application work
C. no comments regarding the application team
D. the inspector's personal opinions of the application team
no comments regarding the application team
, You have just received your NACE CIP Level 1 Certification when
you are asked to supervise a team of uncertified field pipeline
inspectors. Your
FIRST preferred course of action is to:
A. accept the assignment without hesitation
B. advise the prospective employer that you cannot accept the
position
C. meet with the prospective employer to determine the scope of
your role
D. Review the NACE Attestation prior to making a decision
meet with the prospective employer to determine the scope of your
role
Good records can provide maintenance departments with detailed
information about ALL of the following EXCEPT
A. what items were coated
B. what materials were used
C. when the coating will be reapplied
D. how the item was coated
when the coating will be reapplied
