UNION PACIFIC CONDUCTOR FINAL
ACTUAL EXAM PAPER 2026
QUESTIONS WITH ANSWERS GRADED
A+
◍ Clear.
Answer: Proceed
◍ What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track C crossing.
Answer: A. Block
◍ Stop.
Answer: Stop train or engine before passing next signal
◍ What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons.
Answer: B. Signal aspect
◍ restricting.
Answer: Proceed at restricted speed, not exceeding prescribed speed through
turnout when applicable.
◍ According to rules hierarchy the system special instruction can be updated
by which of the following?
A. Service unit general order
B. General notice
, C. System general order.
Answer: C. System general order
◍ Approach.
Answer: proceed prepare to stop at the next signal, trains exceeding 30mph
at next signal trains must not exceed 30mph
◍ What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal.
Answer: C. Controlled signal
◍ advance appraoch.
Answer: proceed prepare to stop at the second signal, trains exceeding
40mph must reduce speed to 40mph
◍ approach diver.
Answer: Proceed prepared to advance on diverging route at next signal at
prescribed speed through turnout.
◍ Distant Signal approach.
Answer: Proceed prepared to stop any part of train or engine passing next
signal or switch indicator
◍ Your duties require you to cross through a train or a standing cut of cars.
After proper protection is provided and before crossing over from one side
of the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover
platform and handholds (when available).
B. On equipment where crossover platforms and handholds are not
available, use end of car structural bracing to maintain 3-point contact, il
sate to do so.
C. Both answers are correct..
Answer: C. Both answers are correct
◍ Distant Signal clear.
, Answer: Proceed . If delayed between this signal and next signal Rule 9.9 or
Rule 9.9.1 applies .
◍ Distant signal approach diverging.
Answer: Proceed prepared to advance on diverging route at next signal at
prescribed speed through turnout.
◍ Approach Clear sixty.
Answer: train exceeding 60 mph at next signal trains must not exceed
60mph
◍ What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard.
Answer: C. Yard
◍ To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone.
Answer: A. Breach
◍ approach clear fifty.
Answer: Proceed. Trains exceeding 50 MPH proceed prepared to pass the
next signal not exceeding 50 MPH. When signal governs the approach to a
control point with a 50 MPH turnout speed, be prepared to advance on
diverging route.
◍ Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A. Let go with both hands before your feet touch the ground or other
support.
B. Retain a grip with both hands on the handhold until both feet are firmly
ACTUAL EXAM PAPER 2026
QUESTIONS WITH ANSWERS GRADED
A+
◍ Clear.
Answer: Proceed
◍ What is a length of a track between consecutive block signal or between a
block signal and the end of the block system limit.
A. Block
B. Main track C crossing.
Answer: A. Block
◍ Stop.
Answer: Stop train or engine before passing next signal
◍ What is the appearance of a fixed or cab signal ?
A. Signal indication
B. Signal aspect
C. Signal reasons.
Answer: B. Signal aspect
◍ restricting.
Answer: Proceed at restricted speed, not exceeding prescribed speed through
turnout when applicable.
◍ According to rules hierarchy the system special instruction can be updated
by which of the following?
A. Service unit general order
B. General notice
, C. System general order.
Answer: C. System general order
◍ Approach.
Answer: proceed prepare to stop at the next signal, trains exceeding 30mph
at next signal trains must not exceed 30mph
◍ What is an absolute signal that is controlled by a controlled operator?
A. Track occupation signal
B. Stop and proceed signal
C. Controlled signal.
Answer: C. Controlled signal
◍ advance appraoch.
Answer: proceed prepare to stop at the second signal, trains exceeding
40mph must reduce speed to 40mph
◍ approach diver.
Answer: Proceed prepared to advance on diverging route at next signal at
prescribed speed through turnout.
◍ Distant Signal approach.
Answer: Proceed prepared to stop any part of train or engine passing next
signal or switch indicator
◍ Your duties require you to cross through a train or a standing cut of cars.
After proper protection is provided and before crossing over from one side
of the equipment to the other side, you should?
A. Choose equipment carefully, using cars equipped with a crossover
platform and handholds (when available).
B. On equipment where crossover platforms and handholds are not
available, use end of car structural bracing to maintain 3-point contact, il
sate to do so.
C. Both answers are correct..
Answer: C. Both answers are correct
◍ Distant Signal clear.
, Answer: Proceed . If delayed between this signal and next signal Rule 9.9 or
Rule 9.9.1 applies .
◍ Distant signal approach diverging.
Answer: Proceed prepared to advance on diverging route at next signal at
prescribed speed through turnout.
◍ Approach Clear sixty.
Answer: train exceeding 60 mph at next signal trains must not exceed
60mph
◍ What is a system of tracks, other than main tracks and sidings, that is used
for making up trains, storng cars, and other purposes?
A. Siding
B. Main track
C. Yard.
Answer: C. Yard
◍ To enter an area between two adjacent tracks is the glossary definition of ?
A. Breach
B. Crossing Through
C. Red Zone.
Answer: A. Breach
◍ approach clear fifty.
Answer: Proceed. Trains exceeding 50 MPH proceed prepared to pass the
next signal not exceeding 50 MPH. When signal governs the approach to a
control point with a 50 MPH turnout speed, be prepared to advance on
diverging route.
◍ Employees must not get on or off cars and engines (whether standing or
moving) except when required in the performance of duty, and only when it
can be done safely. When getting off standing equipment:
A. Let go with both hands before your feet touch the ground or other
support.
B. Retain a grip with both hands on the handhold until both feet are firmly
