Questions and Answers with complete solution List one of
the advantages of modern cartridges? - They are reliable.
Name the four advantages of cartridges? - 1. They were
easily loaded into the bre
List one of the advantages of modern cartridges?
They are reliable.
Name the four advantages of cartridges?
1. They were easily loaded into the breech.
2. The expending case prevented gas leakage.
3. They were largely waterproof.
4. They were more reliable.
What are some disadvantages of owning a Flintlock?
1. Flint wear out of break.
2. Springs can fail.
What are some disadvantages of owning a Wheel Lock?
1. Mechanisms are complex and expensive to make.
2. Winding is slow and springs often fail.
What are the four types of Black Powder?
1. Fg: Very coarse granules of powder. Used in large muskets.
2. FFg: Finer granules than Fg. Used in muzzleloading shotguns, big-bore rifles and
single-shot pistols of .45 calibre and up.
3. FFFg: Finer granules than FFg and the most common type. Used on nearly all cap
and ball revolvers.
4. FFFFg: The finest granules, also called priming powder. Used only in priming pans.
Never use this type of powder as powder charge.
What are the possible punishments for a person who stores, displays, transports
or handles firearms contrary to the Storage, Display, Transportation and Handling
of Firearms by Individual Regulation?
1. Guilty of an indictable offence and liable to imprisonment;
a. In the case of first offence, for a term not exceeding two years; and
b. In the case of a second or subsequent offence, for a term not exceeding five years; or
2. Guilty of an offence punishable on summary convection (a fine of $5000 and/or six
months imprisonment
What does PROVE stand for?
P: Point the firearm in the safest available direction.
R: Remove all ammunition.
O: Observe the chamber(s).
V: Verify the feeding path.
E: Examine the bore for obstruction (visually or with a rod).
What are the possible punishment for pointing a firearm at a person without
lawful excuse?
, 1. Guilty of an indictable offence and liable to imprisonment for a term of five years; or
2. Guilty of an offence punishable on summary convention (a fine of $5000 and/or six
months imprisonment.
What does The Vital Four ACTS of Firearm Safety stand for?
A: Assume the firearm is loaded.
C: Control the muzzle direction at all times.
T: Trigger finger must be kept off the trigger.
S: See that the firearm is unloaded- PROVE it's safe.
What is a disadvantage of owning a Percussion Cap?
The cap separates from the powder and bullet.
What is a disadvantage of owning a Matchlock?
It fails in the wind and rain.
What is the name of the similar mechanism used in both the Flintlock and Wheel
lock?
-The flint for the Flintlock creates a spark which ignites the powder in the flash pan.
-The iron pyrites for the wheel lock creates a spark when it comes in contact with the
wheel.
What should be done with older firearms?
Older firearms should be inspected by a qualified gunsmith to be sure they can be fired
safely.
What was the role of firearms in the development of Canada?
1. They were used for fur trade.
2. They were used for people to gather food.
What was the role of the percussion cap in the fire sequence?
Provides explosives charge.
Why should you follow the manufacture's instructions redrawing powder types?
Because of the advancement in technology, some firearms are manufactured to handle
either smokeless, black powder or blackpowder substitute. It is emphasized that all
individuals follow the manufacture's instructions regarding powder types and safe loads.
What are the four safety steps should be taken to make sure a muzzleloader is
not primed to fire?
1. Point the muzzle in the safest available direction and keep finger off the trigger and
out of the trigger guard.
2. Check that the hammer is NOT in full-cock position.
3. Check for a percussion cap.
4. If the firearm is primed, remove cap or priming powder.
Where should muzzleloader firearm owners check before using?
For other models of muzzleloading firearms, check with the manufacturer for specific
safety features and information regarding the loading and unloading process.
What should be done with muzzleloaders that have safety catches?
Activate the safety catch before loading it. Prior to loading the firearm, use a cleaning
rod with a fitted patch to check the gun bore and fire cap to ensure that nothing
obstructs the chamber and gun bore. It is very important that the exact loading and
unloading procedures are followed when handling muzzleloaders. Before attempting it,
get the assistance of a qualified individual and carefully follow the instructions in your
owner's manual.