CSA W59 welding inspector level 126 Questions and Answers| Solved Correctly

3.1 Contractors In the absence of specific requirements in the governing design standard , at the option of the engineer what other standards shall the contractor be certified too ? If no standard is required what shall the contractor prove ? - ️️W47.1 The contractor must prove their compentency to the engineer. 3.1.2 Welding processes What processes are covered by this standard ? - ️️SMAW, GMAW, MCAW, FCAW, SAW, ESW, EGW, SW Filler metals and allied materials are classified under what standard ? - ️️CSA W48 What processes filler metals and other materials not covered under CSA W48? - ️️Stud welding is not covered under CSA W48. It shall conform to the requirements of clause 3.1.2.2 Any welding process not covered by CSA W59 or not written into this standard shall be covered under the acceptance criteria of what other standard ? - ️️CSA W47.1 3.1.3 Prequalified joints What processes are deemed pre qualified as long as they conform to what clause ? And therefore are approved for use with out joint welding qualification providing that welding procedures also conform to clause 4,5,10 - ️️SMAW, SAW, FCAW, MCAW (spray transfer) and GMAW (spray transfer) as long as they conform to clause 10 shall be deemed as prequalified .