MSF Motorcycle Safety Foundation eCourse || Already
Passed.
FINE-C Refers to correct answers an engine pre-start routine.
FINE-C stands for, correct answers Fuel, Ignition, Neutral, Engine cut-off switch, Choke and
Clutch.
The F in FINE-C means to.. correct answers Fuel, if equipped, means to turn the fuel supply
valve on.
The I in FINE-C is for correct answers Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
The N in FINE-C is for correct answers Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral, the motorcycle will roll forward and
backward with the clutch lever and front brake lever released.
The E in FINE-C is for correct answers Engine cut-off switch means put the switch in the
Run/On position.
The C in FINE-C is for correct answers Choke and Clutch, means to set the choke and squeeze in
the clutch lever. The choke should be On for a cold engine, although some motorcycles do not
have a choke.
Always apply at least one _________ when starting the engine. correct answers Brake.
Do not use the ________ if the _________ is On as this could provide too much fuel to the
engine. correct answers throttle, choke
Once the engine is started, you can release the _________ lever, but do so slowly in case the
motorcycle is not in _________. correct answers clutch, neutral
Do not take your hand off the ________ when starting the engine of a motorcycle because the
motorcycle may be in gear. correct answers clutch,
The throttle is located on correct answers The right hand grip.
To roll on the throttle means to, correct answers twist the throttle Towards You.
The clutch level is located on correct answers The left hand grip.
When you squeeze in the clutch, correct answers there is no power going to the rear wheel.
The gearshift is located on correct answers the left footrest.
, To use the gearshift, correct answers Lift your foot up for a higher gear, and press down for a
lower gear.
Whens shifting gears, your foot only needs to move up or down _________ correct answers an
inch or so.
Most motorcycles have how many gears? correct answers 5 or 6
Neutral gear is located in between which gears? correct answers First and second gear.
The fuel supply valve is located correct answers under the Engine.
What does the fuel supply valve do? correct answers The fuel supply valve controls the amount
of fuel to the engine tank
The Ignition Switch is often located near the correct answers instrument cluster.
Positions on the ignition switch include correct answers On, Off and Lock, and some include a
Park position.
The Lock and Park positions on an ignition switch... correct answers engage the steering lock
and allow the key to be removed.
The Park position on the ignition switch.. correct answers turns on the taillight for better
visibility when parked for a short time on the side of the road.
The Choke Control is located correct answers on the handlebars or near the engine.
What does the choke control do? correct answers It provides an enriched fuel mixture to help
start a cold engine. It also raises the idle to permit the engine to warm quickly. It should be
turned Off as soon as the engine idles smoothly without it.
Fuel Injected motorcycles do or not have a choke control? correct answers They do not.
Where is the engine cut-off switch? correct answers The Engine Cut-Off Switch can be found
near the right handgrip and is operated with the thumb.
What does the engine cut-off switch do? correct answers It allows you to shut off the engine
without removing your hand from the handgrip.
The Turn Signal Switch is usually located correct answers near the left handgrip and is operated
with the thumb.
The High-Low Beam Switch is near correct answers the left handgrip and is operated with the
thumb.
Passed.
FINE-C Refers to correct answers an engine pre-start routine.
FINE-C stands for, correct answers Fuel, Ignition, Neutral, Engine cut-off switch, Choke and
Clutch.
The F in FINE-C means to.. correct answers Fuel, if equipped, means to turn the fuel supply
valve on.
The I in FINE-C is for correct answers Ignition, means turn the ignition switch to the On
position. Some indicator lights should come on.
The N in FINE-C is for correct answers Neutral, means to be in Neutral. The green light in the
instrument cluster "indicates" neutral. When in neutral, the motorcycle will roll forward and
backward with the clutch lever and front brake lever released.
The E in FINE-C is for correct answers Engine cut-off switch means put the switch in the
Run/On position.
The C in FINE-C is for correct answers Choke and Clutch, means to set the choke and squeeze in
the clutch lever. The choke should be On for a cold engine, although some motorcycles do not
have a choke.
Always apply at least one _________ when starting the engine. correct answers Brake.
Do not use the ________ if the _________ is On as this could provide too much fuel to the
engine. correct answers throttle, choke
Once the engine is started, you can release the _________ lever, but do so slowly in case the
motorcycle is not in _________. correct answers clutch, neutral
Do not take your hand off the ________ when starting the engine of a motorcycle because the
motorcycle may be in gear. correct answers clutch,
The throttle is located on correct answers The right hand grip.
To roll on the throttle means to, correct answers twist the throttle Towards You.
The clutch level is located on correct answers The left hand grip.
When you squeeze in the clutch, correct answers there is no power going to the rear wheel.
The gearshift is located on correct answers the left footrest.
, To use the gearshift, correct answers Lift your foot up for a higher gear, and press down for a
lower gear.
Whens shifting gears, your foot only needs to move up or down _________ correct answers an
inch or so.
Most motorcycles have how many gears? correct answers 5 or 6
Neutral gear is located in between which gears? correct answers First and second gear.
The fuel supply valve is located correct answers under the Engine.
What does the fuel supply valve do? correct answers The fuel supply valve controls the amount
of fuel to the engine tank
The Ignition Switch is often located near the correct answers instrument cluster.
Positions on the ignition switch include correct answers On, Off and Lock, and some include a
Park position.
The Lock and Park positions on an ignition switch... correct answers engage the steering lock
and allow the key to be removed.
The Park position on the ignition switch.. correct answers turns on the taillight for better
visibility when parked for a short time on the side of the road.
The Choke Control is located correct answers on the handlebars or near the engine.
What does the choke control do? correct answers It provides an enriched fuel mixture to help
start a cold engine. It also raises the idle to permit the engine to warm quickly. It should be
turned Off as soon as the engine idles smoothly without it.
Fuel Injected motorcycles do or not have a choke control? correct answers They do not.
Where is the engine cut-off switch? correct answers The Engine Cut-Off Switch can be found
near the right handgrip and is operated with the thumb.
What does the engine cut-off switch do? correct answers It allows you to shut off the engine
without removing your hand from the handgrip.
The Turn Signal Switch is usually located correct answers near the left handgrip and is operated
with the thumb.
The High-Low Beam Switch is near correct answers the left handgrip and is operated with the
thumb.
