CRMP Practice Test 1 Questions And Correct
Answers 100% Verified
What is determined as the effective ratio of technicians that a Maintenance Supervisor
can supervise? The best practice is 1 to ___? A. A best practice is 15—30 technicians.
B. A best practice is 8-15 technicians.
C. A best practice is 50-80 technicians.
D. It cannot be quantified since everyone works in different leadership styles.
B. A best practice is 8-15 technicians.
Supervision is recommended at 8 to 15 technicians per supervisor.
Filter ratings are important to any system. Which of the following is used to derive filter
efficiency?
A. Micron rating
B. Beta ratio
C. Flow rate
D. Media type
B. Beta ratio
,This filter capture efficiency can be determined directly from the beta ratio, because the
percent capture efficiency is ((beta - 1)/beta) x 100. The above-described filter with a
beta of 10 at five microns can, therefore said to be 90 percent efficient in the removal of
particles five microns or larger.
Assume this position is NOT a dual planner/scheduler. Maintenance Planner-A role
which has the capabilities for planning by how many technicians.
A. Best practice is 15-30 technicians.
B. Best practice is 8-15 technicians.
C. Best practice is 50-80 technicians.
D. Unable to quantify since everyone works at different paces.
A. Best practice is 15-30 technicians.
The span of control recommended in maintenance planning is a range between 15 to 30
technicians per maintenance planner.
With which of the following is Economic Order Quantity (EOQ) best described?
A. An equation that compares inventory demand plus ordering cost versus the Inventory
caring cost.
B. Inventory audit
C. To determine how the factory will perform the following year.
D. Is the same as Return on Investment (ROI).
OEQ = Stdev 2 Demand supply /Inventory caring cost. You will not be asked to perform
this equation for the exam, but the inputs are important
D. Is equal to Return on Investment (ROI). OEQ = Stdev 2 Demand supply /Inventory
caring cost. You will not be required to do this formula for the exam, but the inputs are
relevant
Which of the following is the least good choice to do in order to achieve optimization in
the inventories? A. To concentrate on Economic Order Quantity (EOQ).
B. To achieve reduction in headcounts.
, C. To be able to need more space.
D. Increase MTTR.
A. Economic Order Quantity
Economic Order Quantity benefits from optimization materials and spare inventory,
such as reducing inventory cost, eliminating or reducing craft wait time and reduces
stock cost.
What is the classification to determine the importance of inventory levels?
A. XYZ analysis
B. ABC Classification
C. ABC analysis
D. XYZ Classification
C. ABC analysis
A represents the most critical and C is the least critical of the stocked inventory.
What is the term for the average time expected between two failures for a repairable
system?
A. Meantime to fix (MTTR)
B. Meantime failure (MTTF)
C. Meantime between failures (MTBF)
D. Meantime between availability (MTBA)
C. Meantime between failures (MTBF)
It is indicative of how fast an organization can respond in case of an unplanned
breakdown and subsequently repair it. Meantime between availability is not a correct
metric.
Answers 100% Verified
What is determined as the effective ratio of technicians that a Maintenance Supervisor
can supervise? The best practice is 1 to ___? A. A best practice is 15—30 technicians.
B. A best practice is 8-15 technicians.
C. A best practice is 50-80 technicians.
D. It cannot be quantified since everyone works in different leadership styles.
B. A best practice is 8-15 technicians.
Supervision is recommended at 8 to 15 technicians per supervisor.
Filter ratings are important to any system. Which of the following is used to derive filter
efficiency?
A. Micron rating
B. Beta ratio
C. Flow rate
D. Media type
B. Beta ratio
,This filter capture efficiency can be determined directly from the beta ratio, because the
percent capture efficiency is ((beta - 1)/beta) x 100. The above-described filter with a
beta of 10 at five microns can, therefore said to be 90 percent efficient in the removal of
particles five microns or larger.
Assume this position is NOT a dual planner/scheduler. Maintenance Planner-A role
which has the capabilities for planning by how many technicians.
A. Best practice is 15-30 technicians.
B. Best practice is 8-15 technicians.
C. Best practice is 50-80 technicians.
D. Unable to quantify since everyone works at different paces.
A. Best practice is 15-30 technicians.
The span of control recommended in maintenance planning is a range between 15 to 30
technicians per maintenance planner.
With which of the following is Economic Order Quantity (EOQ) best described?
A. An equation that compares inventory demand plus ordering cost versus the Inventory
caring cost.
B. Inventory audit
C. To determine how the factory will perform the following year.
D. Is the same as Return on Investment (ROI).
OEQ = Stdev 2 Demand supply /Inventory caring cost. You will not be asked to perform
this equation for the exam, but the inputs are important
D. Is equal to Return on Investment (ROI). OEQ = Stdev 2 Demand supply /Inventory
caring cost. You will not be required to do this formula for the exam, but the inputs are
relevant
Which of the following is the least good choice to do in order to achieve optimization in
the inventories? A. To concentrate on Economic Order Quantity (EOQ).
B. To achieve reduction in headcounts.
, C. To be able to need more space.
D. Increase MTTR.
A. Economic Order Quantity
Economic Order Quantity benefits from optimization materials and spare inventory,
such as reducing inventory cost, eliminating or reducing craft wait time and reduces
stock cost.
What is the classification to determine the importance of inventory levels?
A. XYZ analysis
B. ABC Classification
C. ABC analysis
D. XYZ Classification
C. ABC analysis
A represents the most critical and C is the least critical of the stocked inventory.
What is the term for the average time expected between two failures for a repairable
system?
A. Meantime to fix (MTTR)
B. Meantime failure (MTTF)
C. Meantime between failures (MTBF)
D. Meantime between availability (MTBA)
C. Meantime between failures (MTBF)
It is indicative of how fast an organization can respond in case of an unplanned
breakdown and subsequently repair it. Meantime between availability is not a correct
metric.
