Ammo CDC set 4| EXAM QUESTIONS & 100%
How far in front of an M18A1 mine do we consider inside the danger zone? - ✔✔250
meters.
Which action is not an authorized method for securing loose chain assembly ends? -
✔✔Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? - ✔✔Release the adjusting mechanism; pull
the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is
difficult to shift? - ✔✔Drive forward or backward a short distance, stop the tractor,
and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment
(CMBRE)? - ✔✔AN/GYQ-79
When and where is the MK124 Mod 0 signal used? - ✔✔Day or night, land or sea use.
After final tighening of the cable-type load binder, verify... - ✔✔Threads (more than
one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? - ✔✔General maintenance.
After HCU-6/E pallets are positioned on a rollerized trailer, what can you use to secure
the pallets to the trailer? - ✔✔MB-1 chain assemblies or tie-down straps.
,The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test
set? - ✔✔AN/GYQ-79
In an electrically-timed fuze, what component replaces the arming vanes used in
mechanically timed fuzes? - ✔✔Electric charging assembly.
What are the basic components of an explosive train? - ✔✔Detonator, booster, and a
bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? -
✔✔Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an
aircraft/K-loader? - ✔✔An adjustable ramp.
What mortar has a short range and a small explosive charge? - ✔✔Light
What is the inspection cycle for the UALS replenisher? - ✔✔Every 30 days when in
use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed
system? - ✔✔Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last? -
✔✔Gantry.
, Which component of the A/E32K-3 MAC can be used as a forklift adapter to raise the
gantry to full height? - ✔✔Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target
penetration? - ✔✔Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? - ✔✔The tail fuze well.
What components, minimum, make up a propulsion system? - ✔✔Rocket motor and
rocket motor igniter.
In what length is fire wire issued? - ✔✔500 feet.
Externally, the M129 leaflet bomb is similar to the... - ✔✔M117, 750-pound bomb.
When can you store powered equipment in a building with explosives? - ✔✔Only
when stored in fire-resistive buildings and such equipment is essential to day-to-day
operations.
What tool can initiate cycling ammunition through the UALS replenisher manually? -
✔✔1/2-inch speed wrench.
What is the arming delay distance for the M505 fuze? - ✔✔10-35 feet.
How many trolley and chock assemblies are supplied with the MHU-110/M
respectively? - ✔✔20 and 40.
How far in front of an M18A1 mine do we consider inside the danger zone? - ✔✔250
meters.
Which action is not an authorized method for securing loose chain assembly ends? -
✔✔Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? - ✔✔Release the adjusting mechanism; pull
the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is
difficult to shift? - ✔✔Drive forward or backward a short distance, stop the tractor,
and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment
(CMBRE)? - ✔✔AN/GYQ-79
When and where is the MK124 Mod 0 signal used? - ✔✔Day or night, land or sea use.
After final tighening of the cable-type load binder, verify... - ✔✔Threads (more than
one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? - ✔✔General maintenance.
After HCU-6/E pallets are positioned on a rollerized trailer, what can you use to secure
the pallets to the trailer? - ✔✔MB-1 chain assemblies or tie-down straps.
,The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test
set? - ✔✔AN/GYQ-79
In an electrically-timed fuze, what component replaces the arming vanes used in
mechanically timed fuzes? - ✔✔Electric charging assembly.
What are the basic components of an explosive train? - ✔✔Detonator, booster, and a
bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? -
✔✔Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an
aircraft/K-loader? - ✔✔An adjustable ramp.
What mortar has a short range and a small explosive charge? - ✔✔Light
What is the inspection cycle for the UALS replenisher? - ✔✔Every 30 days when in
use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed
system? - ✔✔Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last? -
✔✔Gantry.
, Which component of the A/E32K-3 MAC can be used as a forklift adapter to raise the
gantry to full height? - ✔✔Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target
penetration? - ✔✔Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? - ✔✔The tail fuze well.
What components, minimum, make up a propulsion system? - ✔✔Rocket motor and
rocket motor igniter.
In what length is fire wire issued? - ✔✔500 feet.
Externally, the M129 leaflet bomb is similar to the... - ✔✔M117, 750-pound bomb.
When can you store powered equipment in a building with explosives? - ✔✔Only
when stored in fire-resistive buildings and such equipment is essential to day-to-day
operations.
What tool can initiate cycling ammunition through the UALS replenisher manually? -
✔✔1/2-inch speed wrench.
What is the arming delay distance for the M505 fuze? - ✔✔10-35 feet.
How many trolley and chock assemblies are supplied with the MHU-110/M
respectively? - ✔✔20 and 40.
