Page |1
ICC SOILS CARDS 1 - 70 TEST 2025|
BRAND NEW ACTUAL EXAM WITH 100%
VERIFIED QUESTIONS AND CORRECT
SOLUTIONS| GUARANTEED VALUE PACK|
ACE YOUR GRADES.
1. For ASTM D698, Procedure A uses a ___ sieve, Procedure B uses a
___ sieve, and Procedure C uses a ___ sieve. - correct answer - No. 4;
3/8-inch;
3/4-inch
2. For ASTM D698 or D1557, the required sample mass for
Procedures/Methods A and B is approximately ___ and for
Procedure/Method C is approximately ___ of *dry* soil. - correct answer
- 35 lbs;
65 lbs
3. The *field* sample for ASTM D69 or D1557 both should have a *moist*
mass of ___ for Procedure/Method A & B, and ___ for
Procedure/Method C. - correct answer - 50 lbs;
100 lbs
, Page |2
4. The portion of the total sample used in performing the compaction
proctor test is referred to as the ___. - correct answer - test fraction
(finer fraction).
5. The Modified Effort (ASTM D1557) uses a ___ lbf rammer dropped from
a ____ inches, producing a compactive effort of ___ ft-lbf/ft3. - correct
answer - 10;
18;
56,000
6. For ASTM D1557, Method A uses a ___ sieve, Method B uses a ___
sieve, and Method C uses a ___ sieve. - correct answer - No 4;
3/8-inch;
3/4-inch
7. The apparatus for ASTM D422 shall consist of ___ operated stirring
device with a motor that turns at the speed of not less than ___ without a
load. - correct answer - Mechanically;
10,000 rpm
8. _______ are particles of rock that will pass a 12-inch square opening
and be retained on a 3-inch opening, while ___ are particles of rock that
will not pass a 12-inch square opening. - correct answer - Cobbles;
Boulders
ICC SOILS CARDS 1 - 70 TEST 2025|
BRAND NEW ACTUAL EXAM WITH 100%
VERIFIED QUESTIONS AND CORRECT
SOLUTIONS| GUARANTEED VALUE PACK|
ACE YOUR GRADES.
1. For ASTM D698, Procedure A uses a ___ sieve, Procedure B uses a
___ sieve, and Procedure C uses a ___ sieve. - correct answer - No. 4;
3/8-inch;
3/4-inch
2. For ASTM D698 or D1557, the required sample mass for
Procedures/Methods A and B is approximately ___ and for
Procedure/Method C is approximately ___ of *dry* soil. - correct answer
- 35 lbs;
65 lbs
3. The *field* sample for ASTM D69 or D1557 both should have a *moist*
mass of ___ for Procedure/Method A & B, and ___ for
Procedure/Method C. - correct answer - 50 lbs;
100 lbs
, Page |2
4. The portion of the total sample used in performing the compaction
proctor test is referred to as the ___. - correct answer - test fraction
(finer fraction).
5. The Modified Effort (ASTM D1557) uses a ___ lbf rammer dropped from
a ____ inches, producing a compactive effort of ___ ft-lbf/ft3. - correct
answer - 10;
18;
56,000
6. For ASTM D1557, Method A uses a ___ sieve, Method B uses a ___
sieve, and Method C uses a ___ sieve. - correct answer - No 4;
3/8-inch;
3/4-inch
7. The apparatus for ASTM D422 shall consist of ___ operated stirring
device with a motor that turns at the speed of not less than ___ without a
load. - correct answer - Mechanically;
10,000 rpm
8. _______ are particles of rock that will pass a 12-inch square opening
and be retained on a 3-inch opening, while ___ are particles of rock that
will not pass a 12-inch square opening. - correct answer - Cobbles;
Boulders
