NOMAD PRO 2 QUIZ NEW EXAM
2024-2025 LATEST REAL EXAM
WITH ACTUAL NGN QUESTIONS
AND VERIFIED WELL
EXPLAINED 100% CORRECT
ANSWERS
WITH RATIONALES GRADED A+
LATEST UPDATE 2025 WITH
100% GUARANTEED SUCCESS
AFTER DOWNLOAD (ALL
YOUNEED TO PASS YOUR
EXAMS
Radiation safety is at the heart of the NOMAD Pro 2 design. The NOMAD Pro 2 has:
a) Primary shielding to contain the X-ray beam as it is generated
, b) Secondary shielding to direct backscatter radiation away from the operator when properly
positioned
c) Shielding that results in an operator X-ray dose that is well below federal occupational
limits when used correctly
d) Smaller cone and focal point diameter for reduced patient exposure and enhanced image
quality
a) Primary shielding to contain the X-ray beam as it is generated
b) Secondary shielding to direct backscatter radiation away from the operator when properly
positioned
c) Shielding that results in an operator X-ray dose that is well below federal occupational
limits when used correctly
d) Smaller cone and focal point diameter for reduced patient exposure and enhanced image
quality
Describe the operator safety zone and how you will maintain it.
Max protection exists when shield is at the outer edge of the cone, close to the subject and
parallel to the operator.
How do you minimize the chances of "cone-cutting"?
To minimize cone cutting, NOMAD Pro 2 must be properly positioned relative to the
imaging system. (This may also require that the patient tilt their head to maintain the
protection zone). Check compatibility with film holding kits or aiming devices in advance.
What are some factors that would require increased Exposure time?
Various imaging sensors and film speeds and brands available, patient mass and the
technician techniques.
What does the green LED and the green background for the time setting on the screen
indicate?
The NOMAD Pro 2 is READY to fire X-rays on the next trigger pull.
An alarm indicating a partial exposure (when the trigger was not depressed through the entire
timer setting, either on purpose or accidentally) is indicated by a series of beeps and the
____________ message on the screen until a button is pressed.
INCOMPETE / RED
2024-2025 LATEST REAL EXAM
WITH ACTUAL NGN QUESTIONS
AND VERIFIED WELL
EXPLAINED 100% CORRECT
ANSWERS
WITH RATIONALES GRADED A+
LATEST UPDATE 2025 WITH
100% GUARANTEED SUCCESS
AFTER DOWNLOAD (ALL
YOUNEED TO PASS YOUR
EXAMS
Radiation safety is at the heart of the NOMAD Pro 2 design. The NOMAD Pro 2 has:
a) Primary shielding to contain the X-ray beam as it is generated
, b) Secondary shielding to direct backscatter radiation away from the operator when properly
positioned
c) Shielding that results in an operator X-ray dose that is well below federal occupational
limits when used correctly
d) Smaller cone and focal point diameter for reduced patient exposure and enhanced image
quality
a) Primary shielding to contain the X-ray beam as it is generated
b) Secondary shielding to direct backscatter radiation away from the operator when properly
positioned
c) Shielding that results in an operator X-ray dose that is well below federal occupational
limits when used correctly
d) Smaller cone and focal point diameter for reduced patient exposure and enhanced image
quality
Describe the operator safety zone and how you will maintain it.
Max protection exists when shield is at the outer edge of the cone, close to the subject and
parallel to the operator.
How do you minimize the chances of "cone-cutting"?
To minimize cone cutting, NOMAD Pro 2 must be properly positioned relative to the
imaging system. (This may also require that the patient tilt their head to maintain the
protection zone). Check compatibility with film holding kits or aiming devices in advance.
What are some factors that would require increased Exposure time?
Various imaging sensors and film speeds and brands available, patient mass and the
technician techniques.
What does the green LED and the green background for the time setting on the screen
indicate?
The NOMAD Pro 2 is READY to fire X-rays on the next trigger pull.
An alarm indicating a partial exposure (when the trigger was not depressed through the entire
timer setting, either on purpose or accidentally) is indicated by a series of beeps and the
____________ message on the screen until a button is pressed.
INCOMPETE / RED
