CPSI Exam Prep
1. Circular use zone where swing motion occurs Y + 72"
cannot overlap to a distance of________________. (y = vertical distance from the
top of
sitting surface to pivot
point)
2. The front and rear use zone where swing mo- 2x
tion occurs cannot overlap for a distance of x = the vertical distance from the
______ to both the front and the rear. protective surface to the pivot point
of the swing.
3. What is the handhold length of a seated rocking min. length 3"
equipment ?
4. Wheelchair accessible platform: 1/2" (0.5")
The openings in platform, and between edge and railing
may not exceed ______" horizontal opening
5. What is the minimum side use zone for a rotat- 72" ing swing support
structure?
6. Comprehensive program of playground safety - audits
includes.... -inspections
-maintenance
, CPSI Exam Prep
7. What does the middle projection gauge measure?
8. What does the large projection gauge measure?
9. What is the max height of a balance beam?
10.
projection entering brain
thru eye socket
soft tissue damage such as
bruise or ruptured organs
in abdominal area
12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
72"
What is min overlap use zone for To-Fro Swing support
structure?
11. What is the
dowel size of
the
crush/shear
test 0.30"
(5/16") probe
on Merry - Go -
Rounds?
, CPSI Exam Prep
12. Entanglement
hazards:
YES
If connecting devices that have in-fill such as plastic or
cable that completely fills the interior space of both loops
preventing entry items of clothing, is this exempt?
13. What is the
minimum
footrest length
of a seat- 3
1/2" ed spring
rocking
equipment?
14. What is the
dowel size of
crush / sheer
hazards 0.62"
(5/8") with
movement?
15. Partially Bound
Openings:
3/4" (0.75")
The template is considered fully inserted if it goes below
the top of the opening more than ____"
16. What is the
minimum
diameter of
, CPSI Exam Prep
hand grip-
0.95" ping
components?
17. What is the
dowel
diameter for
roller slides?
0.19" (3/16")
18. What is the
minimum
diameter of
handrails?
0.95"
19. What is the
diameter of a
medium
dowel?
.30" (5/16")
20. What is the
distance from
the platform to
the 18"-20"
sliding pole?
21. Stepping forms
must be
stationary
when they
1. Circular use zone where swing motion occurs Y + 72"
cannot overlap to a distance of________________. (y = vertical distance from the
top of
sitting surface to pivot
point)
2. The front and rear use zone where swing mo- 2x
tion occurs cannot overlap for a distance of x = the vertical distance from the
______ to both the front and the rear. protective surface to the pivot point
of the swing.
3. What is the handhold length of a seated rocking min. length 3"
equipment ?
4. Wheelchair accessible platform: 1/2" (0.5")
The openings in platform, and between edge and railing
may not exceed ______" horizontal opening
5. What is the minimum side use zone for a rotat- 72" ing swing support
structure?
6. Comprehensive program of playground safety - audits
includes.... -inspections
-maintenance
, CPSI Exam Prep
7. What does the middle projection gauge measure?
8. What does the large projection gauge measure?
9. What is the max height of a balance beam?
10.
projection entering brain
thru eye socket
soft tissue damage such as
bruise or ruptured organs
in abdominal area
12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
72"
What is min overlap use zone for To-Fro Swing support
structure?
11. What is the
dowel size of
the
crush/shear
test 0.30"
(5/16") probe
on Merry - Go -
Rounds?
, CPSI Exam Prep
12. Entanglement
hazards:
YES
If connecting devices that have in-fill such as plastic or
cable that completely fills the interior space of both loops
preventing entry items of clothing, is this exempt?
13. What is the
minimum
footrest length
of a seat- 3
1/2" ed spring
rocking
equipment?
14. What is the
dowel size of
crush / sheer
hazards 0.62"
(5/8") with
movement?
15. Partially Bound
Openings:
3/4" (0.75")
The template is considered fully inserted if it goes below
the top of the opening more than ____"
16. What is the
minimum
diameter of
, CPSI Exam Prep
hand grip-
0.95" ping
components?
17. What is the
dowel
diameter for
roller slides?
0.19" (3/16")
18. What is the
minimum
diameter of
handrails?
0.95"
19. What is the
diameter of a
medium
dowel?
.30" (5/16")
20. What is the
distance from
the platform to
the 18"-20"
sliding pole?
21. Stepping forms
must be
stationary
when they
