POSTAL AUTOMOTIVE TECHNICIAN EXAM 944 (ACTUAL
2025/2026) WITH 150 QUESTIONS AND 100% VERIFIED
CORRECT ANSWERS LATEST (BRAND NEW!!)
1. The vibration damper on an auto engine is fastened to the
Crankshaft
2. Most small gas engines use a _________ ignition system
Magneto
3. Icing occurs most often
On cool damp days
4. The function of the float in a carburetor is two
Close the needle valve
5. To improve stability when cornering manufactures added a device
to cars called
Stabilizer bar
, 35. Gasoline cannot be used in a diesel because the
Gasoline will start to burn long before the piston reach the top of the
stroke
36. On the compression stroke, diesel engine compresses
Air
37. The idle and low speed circuit in a carburetor is in operative
Speed over 20 mph
38. A generator should be polarized to prevent damage whenever
The generator or regulator wires have been disconnected
39. Turboprop engine is a more efficient than turbo jet engines for
aircraft flying
Short trips
40. A blower or pump which forces air into cylinders at higher than
atmospheric pressure is known as
2025/2026) WITH 150 QUESTIONS AND 100% VERIFIED
CORRECT ANSWERS LATEST (BRAND NEW!!)
1. The vibration damper on an auto engine is fastened to the
Crankshaft
2. Most small gas engines use a _________ ignition system
Magneto
3. Icing occurs most often
On cool damp days
4. The function of the float in a carburetor is two
Close the needle valve
5. To improve stability when cornering manufactures added a device
to cars called
Stabilizer bar
, 35. Gasoline cannot be used in a diesel because the
Gasoline will start to burn long before the piston reach the top of the
stroke
36. On the compression stroke, diesel engine compresses
Air
37. The idle and low speed circuit in a carburetor is in operative
Speed over 20 mph
38. A generator should be polarized to prevent damage whenever
The generator or regulator wires have been disconnected
39. Turboprop engine is a more efficient than turbo jet engines for
aircraft flying
Short trips
40. A blower or pump which forces air into cylinders at higher than
atmospheric pressure is known as
