E5 EPME STUDY BANK QUESTIONS AND ANSWERS
What should you do if you find errors on your PDE? - Answers :Note them, on the
printed copy of the form, sign it and provide documentation to your admin personnel.
How can you access your SWE PDE? - Answers :Direct Access Tab-SWE PDE
Where are deadlines for PDE verification and correction provided? - Answers :Review
the message for deadline for PDE verifications and corrections.
On your PDE you will receive credit for all sea/surf/award points for your first
advancement on or after what date? - Answers :Point Start Date
You will be credited Sea Time points on your PDE at what rate? - Answers :2 points per
year
On your PDE, award points are earned up to what point? - Answers :Members Point
Start Date up to SED (Max 10)
On your PDE, TIR and TIS are computed up to what point? - Answers :Future date for
SWE eligibility
How is risk defined within Risk Management? - Answers :Defined as the possibility of
loss or injury due to exposure to a hazard. Risk is inherent in all operations and
activities.
What is the first choice in the standard of order of precedence for Risk Management
(RM) controls? - Answers :use design and engineering solutions to achieve minimum
risk.
In the RM process, what action follows an evaluation? - Answers :Action 3- Feedback.
Which of the following is a Risk Assessment pitfall? - Answers :
In the first step of the Risk Management Process Cycle, "Why" analysis is used in which
action? - Answers :Action 3 List Causes
Develop controls is the first action in which step in the Risk Management (RM) process?
- Answers :Step 3 Develop Controls and Make Risk Decisions
Within the RM process, which is a type of control can be applied to hazards to mitigate
the risk? - Answers :STAAR- Spread out, Transfer, Avoid, Accept and Reduce
Which of the following is an action in step 4 of the RM process? - Answers :Step 4-
Implement Controls
, Action 1 - Make Implementation
Action 2 - Establish Accountability
Action 3 - Provide Support
You have submitted an eResume but immediately notice that the Job Ranking
Preferences are incorrect. How should you make corrections? - Answers :Click Set Job
Ranking Preference Tab"
Once you have chosen all desired Job Baskets boxes for an eResume, what should be
your next step? - Answers :Click Save to Job Basket
What should you do after ranking positions in order of preference on your eResume? -
Answers :Click Return to previous page
You have submitted an incorrect eResume. What can you do to delete the incorrect
infromation? - Answers :DA does not allow for the deletions of incorrect E-resumes. You
must wait 24hrs and resubmit.
In step 5 of the RM process, ensuring that changes requiring further RM are identified is
part of which action? - Answers :Action 1 Monitor the operation to ensure:
a. controls are implemented correctly, effective and remain in place.
b. changes requiring further RM are identified.
c. action is taken to correct ineffective hazard controls and reinitiate the RM process in
response to new Hazards
d. Hazards and controls are reevaluated any time the personnel, equipment, or mission
tasks change, or new operations are anticipated in an environment not covered in the
initial RM analysis.
What mnemonic provides a simple and convenient aide to identify some approaches to
eliminate or reduce risk? - Answers :STAAR to identify control options - Spread out,
Transfer, Avoid, Accept, and Reduce.
In which step of the Risk Management Process Cycle does a member, establish
accountability - Answers :Step 4 Implement Controls: Action 2- Establish Accountability
In step 1 of the RM process, if time is limited and a thorough task analysis cannot be
performed, what model can be used? - Answers :Use the PEACE model (Planning,
Event complexity, Asset selection, Communications, and Environmental conditions) to
focus the analysis on critical mission/activity elements that can compromise safety and
mission/activity success.
What is the control method to reduce or eliminate risks from a hazard that identifies
when it is possible to avoid specific risks by "going around" them or doing the mission or
task in a different way? - Answers :Avoid
What should you do if you find errors on your PDE? - Answers :Note them, on the
printed copy of the form, sign it and provide documentation to your admin personnel.
How can you access your SWE PDE? - Answers :Direct Access Tab-SWE PDE
Where are deadlines for PDE verification and correction provided? - Answers :Review
the message for deadline for PDE verifications and corrections.
On your PDE you will receive credit for all sea/surf/award points for your first
advancement on or after what date? - Answers :Point Start Date
You will be credited Sea Time points on your PDE at what rate? - Answers :2 points per
year
On your PDE, award points are earned up to what point? - Answers :Members Point
Start Date up to SED (Max 10)
On your PDE, TIR and TIS are computed up to what point? - Answers :Future date for
SWE eligibility
How is risk defined within Risk Management? - Answers :Defined as the possibility of
loss or injury due to exposure to a hazard. Risk is inherent in all operations and
activities.
What is the first choice in the standard of order of precedence for Risk Management
(RM) controls? - Answers :use design and engineering solutions to achieve minimum
risk.
In the RM process, what action follows an evaluation? - Answers :Action 3- Feedback.
Which of the following is a Risk Assessment pitfall? - Answers :
In the first step of the Risk Management Process Cycle, "Why" analysis is used in which
action? - Answers :Action 3 List Causes
Develop controls is the first action in which step in the Risk Management (RM) process?
- Answers :Step 3 Develop Controls and Make Risk Decisions
Within the RM process, which is a type of control can be applied to hazards to mitigate
the risk? - Answers :STAAR- Spread out, Transfer, Avoid, Accept and Reduce
Which of the following is an action in step 4 of the RM process? - Answers :Step 4-
Implement Controls
, Action 1 - Make Implementation
Action 2 - Establish Accountability
Action 3 - Provide Support
You have submitted an eResume but immediately notice that the Job Ranking
Preferences are incorrect. How should you make corrections? - Answers :Click Set Job
Ranking Preference Tab"
Once you have chosen all desired Job Baskets boxes for an eResume, what should be
your next step? - Answers :Click Save to Job Basket
What should you do after ranking positions in order of preference on your eResume? -
Answers :Click Return to previous page
You have submitted an incorrect eResume. What can you do to delete the incorrect
infromation? - Answers :DA does not allow for the deletions of incorrect E-resumes. You
must wait 24hrs and resubmit.
In step 5 of the RM process, ensuring that changes requiring further RM are identified is
part of which action? - Answers :Action 1 Monitor the operation to ensure:
a. controls are implemented correctly, effective and remain in place.
b. changes requiring further RM are identified.
c. action is taken to correct ineffective hazard controls and reinitiate the RM process in
response to new Hazards
d. Hazards and controls are reevaluated any time the personnel, equipment, or mission
tasks change, or new operations are anticipated in an environment not covered in the
initial RM analysis.
What mnemonic provides a simple and convenient aide to identify some approaches to
eliminate or reduce risk? - Answers :STAAR to identify control options - Spread out,
Transfer, Avoid, Accept, and Reduce.
In which step of the Risk Management Process Cycle does a member, establish
accountability - Answers :Step 4 Implement Controls: Action 2- Establish Accountability
In step 1 of the RM process, if time is limited and a thorough task analysis cannot be
performed, what model can be used? - Answers :Use the PEACE model (Planning,
Event complexity, Asset selection, Communications, and Environmental conditions) to
focus the analysis on critical mission/activity elements that can compromise safety and
mission/activity success.
What is the control method to reduce or eliminate risks from a hazard that identifies
when it is possible to avoid specific risks by "going around" them or doing the mission or
task in a different way? - Answers :Avoid
