CSX FREIGHT CONDUCTOR Final
Exam Questions With 100% Correct
Answers Latest Versions 2024 Graded
A+
6104- Your lead train has arrived at Midway Yard to make a pickup of 20 cars.
You will place those cars at the lead end of the train. Having added the cars to
the train and making the appropriate brake test what documents must be updated
before departing? - ANSWER CT-168
4509.1- T/F
If you are handling 1 or more clearance-implicated shipments in your train is
the following statement True or False?
Do not enter a yard terminal where a yard master is on duty, until you tell the
yard master of the shipment. - ANSWER True
4505.1- When handling a train with one or more clearance implicated
shipments, what instructions must be included as part of your CXT train
documents if the shipment was not authorized verbally? - ANSWER Clearance
bureau instructions
301.2-Your train is authorized on the Atlanta subdivision at 50mph. While
descending the grade you exceed the speed on grade to 53mph. What action is
taken? (Your over speeding by 3 mph) - ANSWER The crew members instruct
the locomotive operator to reduce the speed of the train to the authorized speed
,301.2- You are over speeding by 7 mph. What do you do?
(2 Answer) - ANSWER 1) The crew members instruct the locomotive
operators to stop the train at once and notify the proper authority of the
occurrence
2) Shall not move until released
401.3- Rolling equipment shall not foul the track until it can be visually
determined that?
(2 Answer) - ANSWER 1) Switches and derails connected with the movement
are properly lined
2) The attend route is clear
407.1- You been instructed by the yard master to leave cars in track 14. Where
clearance points are not identified or visible. Identify steps required to
determine the clearance point.
(2 Answers) - ANSWER 1) Standing outside the rail off the end of the cross
top of the connected track extend arm toward equipment
2) Place equipment an additional 50ft in the track beyond the point where it can
no longer be touched
401.8- T/F
,After operating a switch or derail the employee must make certain that the
switch is properly lined and the switch point fits properly. Which of the
following is also true?
1) It is equipped with a reflective marking on the handle?
2) It is at least 100ft from a road crossing?
3) The lever is latched?
4) Device is locked if it's equipped with a lock - ANSWER 1) False
2) False
3) True
4) True
406.8- When shoving for purpose other then making a coupling. You must stop
150ft short of a?
(2 Answers) - ANSWER 1) Improperly lined switch
2) Derail
308.1- Train Q79510 is operating in CP territory with maximum speed of 60
mph. The train experiences a train-initiated undesired emergency brake
application. After stopping, the conductor inspects the train, makes the repairs
to the hoses causing the emergency. After all reports to dispatcher are made the
train is permitted to proceed. How must the train operate? -
, Operating at a train speed not to exceed 20 mph for one train length then be
governed by authority for movement rules for that territory
406.3- You been switching cars in a rail yard and you doubled two tracks
together. While shoving your cars into one track, you must?
(2 Answers) - ANSWER 1) Visually protect leading end of movement at all
times
2) Be position on the ground clear of tracks, riding the leading end, or
constantly modern the shove, using technology
406.3- Who is responsible for protecting a shoving or pushing movement? -
ANSWER Any qualified employee
406.2- After coupling your locomotive to a cut of cars. What must you do next?
- ANSWER Stretch the slack to ensure couplers are made
406.3-When pushing or shoving a train, what is your responsibility? -
ANSWER The leading end of the movement must be visually protected by a
qualified employee at all times
300.4-What speed must not be exceeded when a train is operating through a
hand operating crossover not to and from the main track? - ANSWER 10 mph
300.2- Unless otherwise specified speed restrictions applied to the
train? - ANSWER Entire train
Exam Questions With 100% Correct
Answers Latest Versions 2024 Graded
A+
6104- Your lead train has arrived at Midway Yard to make a pickup of 20 cars.
You will place those cars at the lead end of the train. Having added the cars to
the train and making the appropriate brake test what documents must be updated
before departing? - ANSWER CT-168
4509.1- T/F
If you are handling 1 or more clearance-implicated shipments in your train is
the following statement True or False?
Do not enter a yard terminal where a yard master is on duty, until you tell the
yard master of the shipment. - ANSWER True
4505.1- When handling a train with one or more clearance implicated
shipments, what instructions must be included as part of your CXT train
documents if the shipment was not authorized verbally? - ANSWER Clearance
bureau instructions
301.2-Your train is authorized on the Atlanta subdivision at 50mph. While
descending the grade you exceed the speed on grade to 53mph. What action is
taken? (Your over speeding by 3 mph) - ANSWER The crew members instruct
the locomotive operator to reduce the speed of the train to the authorized speed
,301.2- You are over speeding by 7 mph. What do you do?
(2 Answer) - ANSWER 1) The crew members instruct the locomotive
operators to stop the train at once and notify the proper authority of the
occurrence
2) Shall not move until released
401.3- Rolling equipment shall not foul the track until it can be visually
determined that?
(2 Answer) - ANSWER 1) Switches and derails connected with the movement
are properly lined
2) The attend route is clear
407.1- You been instructed by the yard master to leave cars in track 14. Where
clearance points are not identified or visible. Identify steps required to
determine the clearance point.
(2 Answers) - ANSWER 1) Standing outside the rail off the end of the cross
top of the connected track extend arm toward equipment
2) Place equipment an additional 50ft in the track beyond the point where it can
no longer be touched
401.8- T/F
,After operating a switch or derail the employee must make certain that the
switch is properly lined and the switch point fits properly. Which of the
following is also true?
1) It is equipped with a reflective marking on the handle?
2) It is at least 100ft from a road crossing?
3) The lever is latched?
4) Device is locked if it's equipped with a lock - ANSWER 1) False
2) False
3) True
4) True
406.8- When shoving for purpose other then making a coupling. You must stop
150ft short of a?
(2 Answers) - ANSWER 1) Improperly lined switch
2) Derail
308.1- Train Q79510 is operating in CP territory with maximum speed of 60
mph. The train experiences a train-initiated undesired emergency brake
application. After stopping, the conductor inspects the train, makes the repairs
to the hoses causing the emergency. After all reports to dispatcher are made the
train is permitted to proceed. How must the train operate? -
, Operating at a train speed not to exceed 20 mph for one train length then be
governed by authority for movement rules for that territory
406.3- You been switching cars in a rail yard and you doubled two tracks
together. While shoving your cars into one track, you must?
(2 Answers) - ANSWER 1) Visually protect leading end of movement at all
times
2) Be position on the ground clear of tracks, riding the leading end, or
constantly modern the shove, using technology
406.3- Who is responsible for protecting a shoving or pushing movement? -
ANSWER Any qualified employee
406.2- After coupling your locomotive to a cut of cars. What must you do next?
- ANSWER Stretch the slack to ensure couplers are made
406.3-When pushing or shoving a train, what is your responsibility? -
ANSWER The leading end of the movement must be visually protected by a
qualified employee at all times
300.4-What speed must not be exceeded when a train is operating through a
hand operating crossover not to and from the main track? - ANSWER 10 mph
300.2- Unless otherwise specified speed restrictions applied to the
train? - ANSWER Entire train
