Certification 2025/2026 Exam Questions
with Detailed Verified Answers (100%
Correct Answers) | Already Graded A+
can you define and test a ground? - 🧠 ANSWER ✔✔a ground is a point in
the circuit that is connected to the earth. you can use a multimeter-If the
resistance is too high, it may indicate that the ground connection is not
providing adequate protection
electrical safety rules - 🧠 ANSWER ✔✔1.Always use a circuit tester or
voltage detector to check that a circuit is de-energized before working on it.
electrical safety rule - 🧠 ANSWER ✔✔Never touch electrical wiring or
equipment with wet hands or while standing on a wet surface.
electrical safety rule - 🧠 ANSWER ✔✔Do not operate electrical equipment
that is damaged, frayed, or otherwise in poor condition.
electrical safety rule - 🧠 ANSWER ✔✔Use the correct fuse or circuit
breaker for the circuit you are working on.
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
1
PRIVACY STATEMENT. ALL RIGHTS RESERVED
,electrical safety rule - 🧠 ANSWER ✔✔Never remove or bypass the
grounding prong on a plug.
Electrical Safety - 🧠 ANSWER ✔✔Do not use extension cords or multiple
outlet adapters that are not rated for the equipment you are using.
electrical safety - 🧠 ANSWER ✔✔Do not overload circuits by plugging in too
many devices or using high-powered equipment.
electrical safety - 🧠 ANSWER ✔✔Do not use electrical equipment in wet or
damp conditions unless it is specifically designed for that purpose.
electrical safety - 🧠 ANSWER ✔✔Use properly rated and properly installed
surge protectors for sensitive electronic equipment.
electrical safety - 🧠 ANSWER ✔✔Always follow the manufacturer's
instructions for using electrical equipment.
purpose of lockout tag out - 🧠 ANSWER ✔✔to prevent unexpected
energization or startup of machinery or equipment while it is being serviced
or repaired.
state the two types of electrical current - 🧠 ANSWER ✔✔AC and DC
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
2
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, how to use a circuit tester - 🧠 ANSWER ✔✔To test a circuit, first locate the
circuit breaker or fuse that controls the circuit you want to test. Then, using
the circuit tester, touch the red probe to the live wire and the black probe to
the neutral or ground wire.
what is a power source - 🧠 ANSWER ✔✔The power source is the source of
electrical energy for the circuit. It can be a battery, a generator, or a power
outlet. The power source provides the electrical current that flows through
the circuit.
what is a conductor - 🧠 ANSWER ✔✔The conductor is a material that
allows electricity to flow through it, such as a wire. The conductor carries
the electrical current from the power source to the load.
what is a load - 🧠 ANSWER ✔✔The load is the device or appliance that is
being powered by the circuit. It can be a light bulb, a motor, or any other
device that uses electricity. The load converts the electrical energy from the
circuit into some other form of energy, such as light or motion.
what is a switch - 🧠 ANSWER ✔✔The switch is a device that is used to
control the flow of electrical current in the circuit. It can be used to turn the
circuit on or off, allowing the load to be powered or de-powered as needed.
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
3
PRIVACY STATEMENT. ALL RIGHTS RESERVED