Certified Fiber Optics Final Exam Latest Update
2025-2026 115 Questions and 100% Verified
Correct Answers Guaranteed A+
_______ cables have several individual tight buffered fibers inside and outer jacket -
CORRECT ANSWER: Distribution
________ handle the tensile stresses applied to the cable so the fiber is not damaged -
CORRECT ANSWER: Strength members
________ plant cables are permitted to be installed in the building as long as the cable
dose not exceed 15m(50 ft) - CORRECT ANSWER: Outside
__________ control includes having the fiber face perpendicular to the fiber axis, which
is function or proper fiber cleaning or polishing - CORRECT ANSWER: Angular
Misalignment
__________ permit close-up inspection of polishing finishes - CORRECT ANSWER: I
Microscope
___________Kits route loose tube 250um buffered fibers into 900um tight buffer fibers
tubes ready for connectorization - CORRECT ANSWER: Fan Out Kit
_______strength is the ability of a fiber to be stretched or pulled without breaking -
CORRECT ANSWER: Tensile
______may be substituted for OFNR - CORRECT ANSWER: OFNP
, (LAN's) typically used _______ sources and Wide Area Networks typically
used________sources - CORRECT ANSWER: LED, Laser
(NEC) is published every ____ years by the NFPA - CORRECT ANSWER: 3 years
1mw of power is ___dbm - CORRECT ANSWER: 0 dbm
A ________ is a convenient way to analyze and quantify losses in a fiber optic link. -
CORRECT ANSWER: Power Budget
A feature not normally found in organizers, distribution, or cable management products
in specifying ______type - CORRECT ANSWER: Fiber
A fiber optic installer must follow ____,____ and local building codes when installing
fiber optic cables. - CORRECT ANSWER: Federal, State
A Fiber optic installer should allow for extra ____ when installing a cable to allow for
future changes or restorations in the network design. - CORRECT ANSWER: Slack
A Fusion slicer uses and ___ to heat fibers to about____ degrees Celsius. - CORRECT
ANSWER: electric, 2000 degrees
a Laser has a____ output then an LED - CORRECT ANSWER: Higher
A loss of 3dbm is a _____ percent loss in power. - CORRECT ANSWER: 50%
A single binary digit Is called a - CORRECT ANSWER: Bit
2025-2026 115 Questions and 100% Verified
Correct Answers Guaranteed A+
_______ cables have several individual tight buffered fibers inside and outer jacket -
CORRECT ANSWER: Distribution
________ handle the tensile stresses applied to the cable so the fiber is not damaged -
CORRECT ANSWER: Strength members
________ plant cables are permitted to be installed in the building as long as the cable
dose not exceed 15m(50 ft) - CORRECT ANSWER: Outside
__________ control includes having the fiber face perpendicular to the fiber axis, which
is function or proper fiber cleaning or polishing - CORRECT ANSWER: Angular
Misalignment
__________ permit close-up inspection of polishing finishes - CORRECT ANSWER: I
Microscope
___________Kits route loose tube 250um buffered fibers into 900um tight buffer fibers
tubes ready for connectorization - CORRECT ANSWER: Fan Out Kit
_______strength is the ability of a fiber to be stretched or pulled without breaking -
CORRECT ANSWER: Tensile
______may be substituted for OFNR - CORRECT ANSWER: OFNP
, (LAN's) typically used _______ sources and Wide Area Networks typically
used________sources - CORRECT ANSWER: LED, Laser
(NEC) is published every ____ years by the NFPA - CORRECT ANSWER: 3 years
1mw of power is ___dbm - CORRECT ANSWER: 0 dbm
A ________ is a convenient way to analyze and quantify losses in a fiber optic link. -
CORRECT ANSWER: Power Budget
A feature not normally found in organizers, distribution, or cable management products
in specifying ______type - CORRECT ANSWER: Fiber
A fiber optic installer must follow ____,____ and local building codes when installing
fiber optic cables. - CORRECT ANSWER: Federal, State
A Fiber optic installer should allow for extra ____ when installing a cable to allow for
future changes or restorations in the network design. - CORRECT ANSWER: Slack
A Fusion slicer uses and ___ to heat fibers to about____ degrees Celsius. - CORRECT
ANSWER: electric, 2000 degrees
a Laser has a____ output then an LED - CORRECT ANSWER: Higher
A loss of 3dbm is a _____ percent loss in power. - CORRECT ANSWER: 50%
A single binary digit Is called a - CORRECT ANSWER: Bit
