1|Page
ICC Vapor Recovery VT Exam 2025/ 2026 Complete
Questions And Correct Detailed Answers (Verified
Answers) |Already Graded A+||Latest Exam Version!!!
Type of sealant you should you use on a Phil-Tite Ball
Float nipple: - Answer-Pipe dope
Number of open valves on the clean air separator: -
Answer-One
You must be CERTIFIED by Healy to re-connect a Healy
breakaway, True or False? - Answer-False
The type of pressure gauge is recommended to test Healy
Vac - Answer-SYSA gauge measuring 0-100 WC
On new construction, after July 1, 2004, Can you install an
in-ground Spill Bucket? - Answer-YES-When Piping is
monitored and with VAC
According to Executive Order 201 - Healy P/V Valve
should be torqued at - Answer-20-50 ft-lbs
,2|Page
For a fire to burn, these (3) three primary elements must
exist: - Answer-Fuel, Oxygen, Ignition Source
When working with Electrical - Lock Out Tag Out
procedures are under these guidelines. - Answer-CAL-
OSHA
Organization that certifies vapor recovery systems. -
Answer-CARB or ARB
According to RP 500, a level II technician may NOT
inspect this part. - Answer-Replace VP 1000 Healy Pump
where hanging hardware repairs must be tracked. -
Answer-GDF maintenance log
approved sealant when assembling a Phil-Tite Drop Tube.
- Answer-JB-Kwik
Material direct bury OPW container sleeve shall be made
of. - Answer-Stainless steel
, 3|Page
What P/V vent cap shall be tightened to. - Answer-20-50 ft
lbs
From dispenser to manifold - 2" diameter vapor piping ( 2"
ID) and From manifold to tank - 3" diameter vapor piping
(3" ID) - Answer-Vapor piping
What is the maximum run for vapor piping? - Answer-No
maximum run
How you know a nozzle spout is bad. - Answer-'BAD O-
rinqs
According to PEI RP 300, on a balance Stage II vapor
recovery system nozzle, Vapors typically flow in what
direction of the coaxial hose? - Answer-The outside
pathway
What is the maximum allowable number of P/V caps
allowed on a UST fuel system? - Answer-One
ICC Vapor Recovery VT Exam 2025/ 2026 Complete
Questions And Correct Detailed Answers (Verified
Answers) |Already Graded A+||Latest Exam Version!!!
Type of sealant you should you use on a Phil-Tite Ball
Float nipple: - Answer-Pipe dope
Number of open valves on the clean air separator: -
Answer-One
You must be CERTIFIED by Healy to re-connect a Healy
breakaway, True or False? - Answer-False
The type of pressure gauge is recommended to test Healy
Vac - Answer-SYSA gauge measuring 0-100 WC
On new construction, after July 1, 2004, Can you install an
in-ground Spill Bucket? - Answer-YES-When Piping is
monitored and with VAC
According to Executive Order 201 - Healy P/V Valve
should be torqued at - Answer-20-50 ft-lbs
,2|Page
For a fire to burn, these (3) three primary elements must
exist: - Answer-Fuel, Oxygen, Ignition Source
When working with Electrical - Lock Out Tag Out
procedures are under these guidelines. - Answer-CAL-
OSHA
Organization that certifies vapor recovery systems. -
Answer-CARB or ARB
According to RP 500, a level II technician may NOT
inspect this part. - Answer-Replace VP 1000 Healy Pump
where hanging hardware repairs must be tracked. -
Answer-GDF maintenance log
approved sealant when assembling a Phil-Tite Drop Tube.
- Answer-JB-Kwik
Material direct bury OPW container sleeve shall be made
of. - Answer-Stainless steel
, 3|Page
What P/V vent cap shall be tightened to. - Answer-20-50 ft
lbs
From dispenser to manifold - 2" diameter vapor piping ( 2"
ID) and From manifold to tank - 3" diameter vapor piping
(3" ID) - Answer-Vapor piping
What is the maximum run for vapor piping? - Answer-No
maximum run
How you know a nozzle spout is bad. - Answer-'BAD O-
rinqs
According to PEI RP 300, on a balance Stage II vapor
recovery system nozzle, Vapors typically flow in what
direction of the coaxial hose? - Answer-The outside
pathway
What is the maximum allowable number of P/V caps
allowed on a UST fuel system? - Answer-One
