, TESTBANK for Principles and Practice An
Integrated Approach to Engineering Graphics and
AutoCAD 2026 By Randy H. Shih
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
6- Test Bank Solutions at the End of the Chapter
Our email:
,Chapter 01 - Introduction and AutoCAD
Fundamentals
1. CAD systems reduce the need for repetitive design work by enabling quick modifications
and reuse of existing designs.
A) True
B) False
2. The AutoCAD graphics window does not include any tools or command options.
A) True
B) False
3. The cursor in AutoCAD is limited to a standard arrow pointer and cannot be changed.
A) True
B) False
4. CAD software enables users to create both two-dimensional and three-dimensional
models.
A) True
B) False
5. The Coordinate System in AutoCAD is used to define the position of objects in the
graphics window.
A) True
B) False
6. What is one of the primary benefits of using a CAD system?
A) It eliminates the need for any design review
B) It reduces design cycle time and enhances accuracy
C) It replaces the need for engineering knowledge
D) It makes manual drafting mandatory
7. What does the AutoCAD graphics window primarily display?
A) The command line only
B) A list of AutoCAD tools
C) Icons and menus only
D) The drawing area with the coordinate system
8. Which of the following best describes the function of the Coordinate System in
AutoCAD?
A) To define locations and directions within the drawing
B) To print the design
C) To store drawing templates
D) To control file names
9. Which key is commonly used to cancel a command in AutoCAD?
A) Enter
B) Escape
1
, C) Tab
D) Spacebar
10. What happens when you click the Application icon in AutoCAD?
A) It displays file-related commands like New, Open, and Save
B) It runs a tutorial
C) It exits the program
D) It opens a new drawing only
11. Which menu provides access to drawing setup and model space tools?
A) Insert
B) Home
C) Manage
D) Annotate
12. Which AutoCAD feature allows for entering commands directly?
A) Drawing tab
B) Command prompt
C) Layout tab
D) Tool palette
13. The AutoCAD interface element that offers options like Save, Undo, and Redo is called
the:
A) Quick Access Toolbar
B) Status Bar
C) Model Browser
D) Coordinate System
14. What is the function of the Status Bar in AutoCAD?
A) It controls printing options
B) It manages user accounts
C) It provides quick access to drawing aids
D) It displays project names
15. Upon startup of AutoCAD, what is one of the first actions typically required from the
user?
A) Create a new drawing or opening an existing drawing file
B) Choosing a background color
C) Writing a script
D) Logging into the command prompt
2
,Answer Keys
Question Answer Question Answer
1 A 9 B
2 B 10 A
3 B 11 B
4 A 12 B
5 A 13 A
6 B 14 C
7 D 15 A
8 A
3
, Chapter 02 - Geometric Constructions
1. Geometric constructions are essential tools for developing visualization and problem-
solving skills.
A) True
B) False
2. A line perpendicular to another line must always intersect it at a 30-degree angle.
A) True
B) False
3. Bisection of a line segment results in two equal parts.
A) True
B) False
4. The process of constructing an equilateral triangle involves drawing three arcs with
different radii.
A) True
B) False
5. An arc tangent to two lines must touch both lines at exactly one point..
A) True
B) False
6. What is the primary purpose of learning geometric constructions?
A) To memorize CAD commands
B) To develop artistic drawing skills
C) To improve spatial visualization and problem-solving
D) To practice freehand sketching
7. Which of the following tools is most commonly used to construct a perpendicular
bisector?
A) Compass and straightedge
B) Divider and protractor
C) CAD software
D) Ruler only
8. In constructing an arc through three points, what is the purpose of creating compass
arcs?
A) Creating tangent arcs
B) Create two 45 degrees lines
C) Divide the lines into 3 equal parts
D) Bisecting the lines connecting the points
9. When bisecting an angle, the arcs drawn from each leg must:
A) Be perpendicular
B) Be random in size
C) Be the same length
1
Integrated Approach to Engineering Graphics and
AutoCAD 2026 By Randy H. Shih
Notes
1- The file is chapter after chapter.
2- We have shown you few pages sample.
3- The file contains all Appendix and Excel sheet
if it exists.
4- We have all what you need, we make update
at every time. There are many new editions
waiting you.
5- If you think you purchased the wrong file You
can contact us at every time, we can replace it
with true one.
6- Test Bank Solutions at the End of the Chapter
Our email:
,Chapter 01 - Introduction and AutoCAD
Fundamentals
1. CAD systems reduce the need for repetitive design work by enabling quick modifications
and reuse of existing designs.
A) True
B) False
2. The AutoCAD graphics window does not include any tools or command options.
A) True
B) False
3. The cursor in AutoCAD is limited to a standard arrow pointer and cannot be changed.
A) True
B) False
4. CAD software enables users to create both two-dimensional and three-dimensional
models.
A) True
B) False
5. The Coordinate System in AutoCAD is used to define the position of objects in the
graphics window.
A) True
B) False
6. What is one of the primary benefits of using a CAD system?
A) It eliminates the need for any design review
B) It reduces design cycle time and enhances accuracy
C) It replaces the need for engineering knowledge
D) It makes manual drafting mandatory
7. What does the AutoCAD graphics window primarily display?
A) The command line only
B) A list of AutoCAD tools
C) Icons and menus only
D) The drawing area with the coordinate system
8. Which of the following best describes the function of the Coordinate System in
AutoCAD?
A) To define locations and directions within the drawing
B) To print the design
C) To store drawing templates
D) To control file names
9. Which key is commonly used to cancel a command in AutoCAD?
A) Enter
B) Escape
1
, C) Tab
D) Spacebar
10. What happens when you click the Application icon in AutoCAD?
A) It displays file-related commands like New, Open, and Save
B) It runs a tutorial
C) It exits the program
D) It opens a new drawing only
11. Which menu provides access to drawing setup and model space tools?
A) Insert
B) Home
C) Manage
D) Annotate
12. Which AutoCAD feature allows for entering commands directly?
A) Drawing tab
B) Command prompt
C) Layout tab
D) Tool palette
13. The AutoCAD interface element that offers options like Save, Undo, and Redo is called
the:
A) Quick Access Toolbar
B) Status Bar
C) Model Browser
D) Coordinate System
14. What is the function of the Status Bar in AutoCAD?
A) It controls printing options
B) It manages user accounts
C) It provides quick access to drawing aids
D) It displays project names
15. Upon startup of AutoCAD, what is one of the first actions typically required from the
user?
A) Create a new drawing or opening an existing drawing file
B) Choosing a background color
C) Writing a script
D) Logging into the command prompt
2
,Answer Keys
Question Answer Question Answer
1 A 9 B
2 B 10 A
3 B 11 B
4 A 12 B
5 A 13 A
6 B 14 C
7 D 15 A
8 A
3
, Chapter 02 - Geometric Constructions
1. Geometric constructions are essential tools for developing visualization and problem-
solving skills.
A) True
B) False
2. A line perpendicular to another line must always intersect it at a 30-degree angle.
A) True
B) False
3. Bisection of a line segment results in two equal parts.
A) True
B) False
4. The process of constructing an equilateral triangle involves drawing three arcs with
different radii.
A) True
B) False
5. An arc tangent to two lines must touch both lines at exactly one point..
A) True
B) False
6. What is the primary purpose of learning geometric constructions?
A) To memorize CAD commands
B) To develop artistic drawing skills
C) To improve spatial visualization and problem-solving
D) To practice freehand sketching
7. Which of the following tools is most commonly used to construct a perpendicular
bisector?
A) Compass and straightedge
B) Divider and protractor
C) CAD software
D) Ruler only
8. In constructing an arc through three points, what is the purpose of creating compass
arcs?
A) Creating tangent arcs
B) Create two 45 degrees lines
C) Divide the lines into 3 equal parts
D) Bisecting the lines connecting the points
9. When bisecting an angle, the arcs drawn from each leg must:
A) Be perpendicular
B) Be random in size
C) Be the same length
1
