Certified Playground Safety Inspector (CSPI) Actual Exam
Preparation Newest 2025/2026 Complete Questions And
100% Correct Detailed Answers (Verified Answers for
guaranteed pass}
15. The _____ of each play structure shall provide clear
and concise inspection instructions - ANSWER-
Manufacturer
16. Heights of guardrails and protective barriers are
determined by which of the following characteristics of
children - ANSWER-Center of gravity
17. Which of the following is allowed on a public
playground - ANSWER-Swinging exercise rings less than
7" in length are approved for public playgrounds
,18. A component on stationary equipment that fits within a
projection gauge and extends beyond the face of the
gauge is technically defined as a - ANSWER-protrusion
19. According to the CPSC, which of the following
statements is correct - ANSWER-The use zone is the area
under and around the equipment where protective
surfacing is required
20. According to CPSC, good playground supervisors
must understand all EXCEPT - ANSWER-general
playground design
, 21. Where is the best source for accessible design
information - ANSWER-DOJ 2010 ADA Standard for
Accessible Design
22. How should the CPSI determine the impact
attenuation of the poured-in-place safety surfacing when
auditing a playground - ANSWER-Verify the
documentation from the manufacturer
23. In the case that a CPSI will be training co-workers. The
initial goal of the staff training should be to - ANSWER-
ensure awareness of playground safety
Preparation Newest 2025/2026 Complete Questions And
100% Correct Detailed Answers (Verified Answers for
guaranteed pass}
15. The _____ of each play structure shall provide clear
and concise inspection instructions - ANSWER-
Manufacturer
16. Heights of guardrails and protective barriers are
determined by which of the following characteristics of
children - ANSWER-Center of gravity
17. Which of the following is allowed on a public
playground - ANSWER-Swinging exercise rings less than
7" in length are approved for public playgrounds
,18. A component on stationary equipment that fits within a
projection gauge and extends beyond the face of the
gauge is technically defined as a - ANSWER-protrusion
19. According to the CPSC, which of the following
statements is correct - ANSWER-The use zone is the area
under and around the equipment where protective
surfacing is required
20. According to CPSC, good playground supervisors
must understand all EXCEPT - ANSWER-general
playground design
, 21. Where is the best source for accessible design
information - ANSWER-DOJ 2010 ADA Standard for
Accessible Design
22. How should the CPSI determine the impact
attenuation of the poured-in-place safety surfacing when
auditing a playground - ANSWER-Verify the
documentation from the manufacturer
23. In the case that a CPSI will be training co-workers. The
initial goal of the staff training should be to - ANSWER-
ensure awareness of playground safety
