BECC Mod 2 FINAL EXAM REVIEW
WITH UPDATED EXAM QUESTIONS
AND CORRECT SOLUTIONS|A+
GRADED UPDATED 2025|100%
GUARANTEED PASS!!|NEWEST
VERSION||
Where is the EOSS located? - ANSWER ✓ In the Engineering Spaces. There is
also a CD-ROM kept in the log room
Master Plant Procedures are structured so that they are the overall controlling
document used by? - ANSWER ✓ The EOOW
What provides proper valve alignment for each combination of tanks, components,
fuel stations, and systems that are used when accomplishing an evolution? -
ANSWER ✓ Tank Table
What provides tank capacities? - ANSWER ✓ Tank Status Diagrams
The act of opening an electrical circuit breaker or switch at a power supply -
ANSWER ✓ De-energize
The act of closing an electrical circuit breaker or switch at a power supply -
ANSWER ✓ Energize
The opening or shutting of valves in a piping system or the positioning of switches
or controls in an electrical system to permit the required flow of fluids or current -
ANSWER ✓ Align
What is the recommended minimum actions that must be completed prior to plant
start-up? - ANSWER ✓ The Master Pre-light off check list (MLOC)
,What are the 4 actions of the EOCC? - ANSWER ✓ Controlling, Immediate,
Supplemantary and Restoring
What 2 actions of the EOCC must be memorized? - ANSWER ✓ Controlling and
Immediate
Watch station actions that are taken to bring the plant to a safe and stable
operation condition - ANSWER ✓ Supplementary actions
Actions taken to stop spread of casualty and minimize plant losses - ANSWER ✓
Immediate actions
How many parts per million of oil is sufficient enough to cause a sheen? -
ANSWER ✓ 15-20
Why do you need to remove any oil from the bilges? - ANSWER ✓ It may
generate vapors that can ignite with spark or open flame
In accordance with Navy policy, sewage cannot be discharged how many miles
from land? - ANSWER ✓ 3 miles
What does ORM stand for? - ANSWER ✓ Operational Risk Management
What are the 5 steps of ORM? - ANSWER ✓ 1. Identify hazards
2. Assess hazards
3. Make risk decisions
4. Implement controls
5. Supervise follow up
What are the 3 levels of ORM? - ANSWER ✓ The time critical level, deliberate
level and the in-depth level
Ensure hazardous areas around machinery and elevators are - ANSWER ✓ Color
coded
True or False: You should lock escape shuttles so the cannot be opened from the
inside? - ANSWER ✓ False
, What should you wear where the potential exists for falling, slipping, or being
thrown or carried into the water? - ANSWER ✓ A lifejacket
Before attempting to perform repairs or maintenance, equipment should be -
ANSWER ✓ De-energized and properly tagged out of service
How are extremely hot surfaces, especially piping, identified? - ANSWER ✓
Aluminum paint
True or false: Clothing such as an exposure suit, fire retardant utilities(with long
sleeves) or coveralls must be worn in all engineering spaces at all times? -
ANSWER ✓ True
Who do you notify when entering a tank, void, or space not normally manned? -
ANSWER ✓ Department head or Division officer
What is a fireproof material that possesses high tensile strength, good heat and
electrical insulating capabilities, and moderate to good chemical resistance? -
ANSWER ✓ Asbestos
What could be the most deadly of all hazards? - ANSWER ✓ Radiation
Before working aloft, always receive permission from - ANSWER ✓ OOD
Minimizes the transfer of heat to or from the surrounding atmosphere - ANSWER
✓ Thermal insulation
Rigid insulation preformed into rectangular units - ANSWER ✓ Block insulation
The process where heat is transferred from one point to another within a fluid, gas,
or liquid, by circulating or mixing one portion of the fluid with another -
ANSWER ✓ Convection
The heat flow from one part of a body to another part of the same body, or from
one body to another in physical contact - ANSWER ✓ Conduction
WITH UPDATED EXAM QUESTIONS
AND CORRECT SOLUTIONS|A+
GRADED UPDATED 2025|100%
GUARANTEED PASS!!|NEWEST
VERSION||
Where is the EOSS located? - ANSWER ✓ In the Engineering Spaces. There is
also a CD-ROM kept in the log room
Master Plant Procedures are structured so that they are the overall controlling
document used by? - ANSWER ✓ The EOOW
What provides proper valve alignment for each combination of tanks, components,
fuel stations, and systems that are used when accomplishing an evolution? -
ANSWER ✓ Tank Table
What provides tank capacities? - ANSWER ✓ Tank Status Diagrams
The act of opening an electrical circuit breaker or switch at a power supply -
ANSWER ✓ De-energize
The act of closing an electrical circuit breaker or switch at a power supply -
ANSWER ✓ Energize
The opening or shutting of valves in a piping system or the positioning of switches
or controls in an electrical system to permit the required flow of fluids or current -
ANSWER ✓ Align
What is the recommended minimum actions that must be completed prior to plant
start-up? - ANSWER ✓ The Master Pre-light off check list (MLOC)
,What are the 4 actions of the EOCC? - ANSWER ✓ Controlling, Immediate,
Supplemantary and Restoring
What 2 actions of the EOCC must be memorized? - ANSWER ✓ Controlling and
Immediate
Watch station actions that are taken to bring the plant to a safe and stable
operation condition - ANSWER ✓ Supplementary actions
Actions taken to stop spread of casualty and minimize plant losses - ANSWER ✓
Immediate actions
How many parts per million of oil is sufficient enough to cause a sheen? -
ANSWER ✓ 15-20
Why do you need to remove any oil from the bilges? - ANSWER ✓ It may
generate vapors that can ignite with spark or open flame
In accordance with Navy policy, sewage cannot be discharged how many miles
from land? - ANSWER ✓ 3 miles
What does ORM stand for? - ANSWER ✓ Operational Risk Management
What are the 5 steps of ORM? - ANSWER ✓ 1. Identify hazards
2. Assess hazards
3. Make risk decisions
4. Implement controls
5. Supervise follow up
What are the 3 levels of ORM? - ANSWER ✓ The time critical level, deliberate
level and the in-depth level
Ensure hazardous areas around machinery and elevators are - ANSWER ✓ Color
coded
True or False: You should lock escape shuttles so the cannot be opened from the
inside? - ANSWER ✓ False
, What should you wear where the potential exists for falling, slipping, or being
thrown or carried into the water? - ANSWER ✓ A lifejacket
Before attempting to perform repairs or maintenance, equipment should be -
ANSWER ✓ De-energized and properly tagged out of service
How are extremely hot surfaces, especially piping, identified? - ANSWER ✓
Aluminum paint
True or false: Clothing such as an exposure suit, fire retardant utilities(with long
sleeves) or coveralls must be worn in all engineering spaces at all times? -
ANSWER ✓ True
Who do you notify when entering a tank, void, or space not normally manned? -
ANSWER ✓ Department head or Division officer
What is a fireproof material that possesses high tensile strength, good heat and
electrical insulating capabilities, and moderate to good chemical resistance? -
ANSWER ✓ Asbestos
What could be the most deadly of all hazards? - ANSWER ✓ Radiation
Before working aloft, always receive permission from - ANSWER ✓ OOD
Minimizes the transfer of heat to or from the surrounding atmosphere - ANSWER
✓ Thermal insulation
Rigid insulation preformed into rectangular units - ANSWER ✓ Block insulation
The process where heat is transferred from one point to another within a fluid, gas,
or liquid, by circulating or mixing one portion of the fluid with another -
ANSWER ✓ Convection
The heat flow from one part of a body to another part of the same body, or from
one body to another in physical contact - ANSWER ✓ Conduction
