Operations and Coordination Test Exam
2026 Questions and Answers
1. A Reliability Coordinator must have the _________ to immediately direct
reliable entities within their Reliability Coordinator Areas to re-dispatch
generation, reconfigure transmission, or reduce load to mitigate critical conditions
to return the system to a reliable state.
a. purpose
b. desire
c. authority
d. need - Correct answer-c. authority
2. ___________ have the duty to continuously assess transmission reliability and
coordinate emergency operations among the operating entities within the region
and across the regional boundaries.
a. Generator Operators
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
,b. Reliability Coordinators
c. Balancing Authorities
d. Transmission Operators - Correct answer-b. Reliability Coordinators
3. A portion of a Reliability Coordinator Area is experiencing low voltage, what
directives should the Reliability Coordinator give?
a. Increase transfers across area and increase generation in the RC area
b. Increase transfers across area and decrease generation in area with low voltage
c. Lower transfers across area and increase generation in area with low voltage
d. Lower transfers across area and decrease generation in area with low voltage -
Correct answer-c. Lower transfers across area and increase generation in area with
low voltage
4. The ____________ function was established to provide entities with a "big
picture" view of the system.
a. Generation Operator
b. Reliability Coordinator
c. Transmission Operator
d. Balancing Authority - Correct answer-b. Reliability Coordinator
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
, 5. If Reliability Coordinator tasks are delegated to other entities, the Reliability
Coordinator shall verify that these tasks are carried out by ___________ operating
personnel.
a. NERC certified
b. experienced
c. capable
d. competent - Correct answer-a. NERC certified
6. The _____________ shall have documented specification for data and
information to support its reliability coordination tasks.
a. RRO
b. Region
c. Reliability Coordinator
d. None of the above - Correct answer-c. Reliability Coordinator
7. TRUE or FALSE: NERC Standard IRO-002 requires the monitoring of Bulk
Electric System components that could lead to potential SOL and IROL violations.
a. True
b. False - Correct answer-a. True
©COPYRIGHT 2025, ALL RIGHTS RESERVED 3