Georgia Manufactured Housing Installer
Exam Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the minimum distance a manufactured home must be
placed from a property line according to Georgia regulations?
a) 5 feet
b) 10 feet
c) 3 feet
d) 15 feet
b) 10 feet
Manufactured homes must maintain a minimum setback of 10
feet from property lines to ensure safety and accessibility.
2. When installing a manufactured home on a permanent
foundation, what type of anchor system is required?
a) Strap anchors
b) Screw anchors
c) Tie-down system
d) All of the above
c) Tie-down system
Tie-down systems secure the home to the foundation to resist
wind uplift and lateral movement.
,3. Who is responsible for obtaining permits for a manufactured
home installation in Georgia?
a) Homeowner
b) Installer
c) Local building department
d) Manufacturer
b) Installer
The licensed installer is responsible for securing all necessary
permits before installation.
4. What is the recommended slope for the site where a
manufactured home will be installed?
a) 0%
b) 1-2%
c) 5-10%
d) 10-15%
b) 1-2%
A slight slope of 1–2% ensures proper drainage around the home
without causing foundation instability.
5. Which type of skirting is approved for manufactured homes in
Georgia?
a) Wood panels
b) Vinyl
c) Concrete block
d) All of the above
d) All of the above
Approved skirting materials provide protection, ventilation, and
aesthetic finish to the home perimeter.
,6. What is the minimum distance required between a manufactured
home and a private septic system?
a) 5 feet
b) 10 feet
c) 20 feet
d) 30 feet
c) 20 feet
Maintaining at least 20 feet ensures safety and prevents damage
to septic systems.
7. When leveling a manufactured home, which tool is most
commonly used?
a) Laser level
b) Spirit level
c) Plumb bob
d) All of the above
d) All of the above
Leveling requires precision; installers often use multiple tools to
ensure accuracy.
8. What is the standard width for a manufactured home transport on
Georgia roads?
a) 12 feet
b) 14 feet
c) 16 feet
d) 18 feet
b) 14 feet
Georgia transport regulations limit manufactured homes to 14
feet wide without special permits.
, 9. Before installation, what must be inspected on a manufactured
home delivered to a site?
a) Structural integrity
b) Plumbing connections
c) Electrical systems
d) All of the above
d) All of the above
Pre-installation inspections prevent damage and ensure
compliance with safety standards.
10. What is the minimum height clearance required under
electrical service lines for a manufactured home?
a) 10 feet
b) 12 feet
c) 14 feet
d) 15 feet
c) 14 feet
Maintaining proper clearance prevents electrical hazards during
installation and occupancy.
11. Which document must a Georgia installer provide to verify
compliance after completing an installation?
a) Certificate of Occupancy
b) Installation Verification Certificate
c) Warranty Registration
d) Homeowner Manual
b) Installation Verification Certificate
This certificate confirms the home meets all state installation
standards.
Exam Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. What is the minimum distance a manufactured home must be
placed from a property line according to Georgia regulations?
a) 5 feet
b) 10 feet
c) 3 feet
d) 15 feet
b) 10 feet
Manufactured homes must maintain a minimum setback of 10
feet from property lines to ensure safety and accessibility.
2. When installing a manufactured home on a permanent
foundation, what type of anchor system is required?
a) Strap anchors
b) Screw anchors
c) Tie-down system
d) All of the above
c) Tie-down system
Tie-down systems secure the home to the foundation to resist
wind uplift and lateral movement.
,3. Who is responsible for obtaining permits for a manufactured
home installation in Georgia?
a) Homeowner
b) Installer
c) Local building department
d) Manufacturer
b) Installer
The licensed installer is responsible for securing all necessary
permits before installation.
4. What is the recommended slope for the site where a
manufactured home will be installed?
a) 0%
b) 1-2%
c) 5-10%
d) 10-15%
b) 1-2%
A slight slope of 1–2% ensures proper drainage around the home
without causing foundation instability.
5. Which type of skirting is approved for manufactured homes in
Georgia?
a) Wood panels
b) Vinyl
c) Concrete block
d) All of the above
d) All of the above
Approved skirting materials provide protection, ventilation, and
aesthetic finish to the home perimeter.
,6. What is the minimum distance required between a manufactured
home and a private septic system?
a) 5 feet
b) 10 feet
c) 20 feet
d) 30 feet
c) 20 feet
Maintaining at least 20 feet ensures safety and prevents damage
to septic systems.
7. When leveling a manufactured home, which tool is most
commonly used?
a) Laser level
b) Spirit level
c) Plumb bob
d) All of the above
d) All of the above
Leveling requires precision; installers often use multiple tools to
ensure accuracy.
8. What is the standard width for a manufactured home transport on
Georgia roads?
a) 12 feet
b) 14 feet
c) 16 feet
d) 18 feet
b) 14 feet
Georgia transport regulations limit manufactured homes to 14
feet wide without special permits.
, 9. Before installation, what must be inspected on a manufactured
home delivered to a site?
a) Structural integrity
b) Plumbing connections
c) Electrical systems
d) All of the above
d) All of the above
Pre-installation inspections prevent damage and ensure
compliance with safety standards.
10. What is the minimum height clearance required under
electrical service lines for a manufactured home?
a) 10 feet
b) 12 feet
c) 14 feet
d) 15 feet
c) 14 feet
Maintaining proper clearance prevents electrical hazards during
installation and occupancy.
11. Which document must a Georgia installer provide to verify
compliance after completing an installation?
a) Certificate of Occupancy
b) Installation Verification Certificate
c) Warranty Registration
d) Homeowner Manual
b) Installation Verification Certificate
This certificate confirms the home meets all state installation
standards.
