Page 1 of 31
NFPA 70E FINAL Exam QUESTIONS AND CORRECT
DETAILED SOLUTIONS LATEST UPDATED VERSION
JUST RELEASED
Question: Each _____ shall comply with occupational safety and health standards and all rules,
regulations, and orders issued pursuant to the OSH Act which are applicable to their own
actions and conduct.
A) craft
B) employee
C) employer
D) trade - CORRECT ANSWER✔✔B) employee
, Page 2 of 31
Question: Lockout and tagging of circuits, control of hazardous energy, and achieving an
electrically safe work condition are among the safe ______ intended to assure worker, safety,
and health.
A) habits
B) happenings
C) ideas
D) work practices - CORRECT ANSWER✔✔D) work practices
Question: Per OSHA part 1926, Subpart C, the employer shall instruct each employee and the
recognition and avoidance of _____ conditions, and the regulations applicable to their work
environment to control or eliminate any hazards or other exposure to illness or injury.
A) abnormal
, Page 3 of 31
B) normal
C) safe
D) unsafe - CORRECT ANSWER✔✔D) unsafe
Question: OSHA part 1910 states that the lock shall be attached so as to _____ operation of
the disconnecting means unless one resort to undue or the use of tools.
A) allow
B) discourage
C) encourage
, Page 4 of 31
D) prevent - CORRECT ANSWER✔✔D) prevent
Question: OSHA part 1910 states that if a lock _____ be applied, or if the employer can
demonstrate that tagging procedures will provide a level of safety equivalent to that obtained
by the use of a lock, a tag may be used without a lock.
A) can
B) cannot
C) should not
D) will not - CORRECT ANSWER✔✔B) cannot
Q:OSHA defines a ______ as a device that utilizes a positive means such as a lock, either key or
combination type, to hold an energy isolating device in the safe position and prevent the
energizing of a machine or equipment.
NFPA 70E FINAL Exam QUESTIONS AND CORRECT
DETAILED SOLUTIONS LATEST UPDATED VERSION
JUST RELEASED
Question: Each _____ shall comply with occupational safety and health standards and all rules,
regulations, and orders issued pursuant to the OSH Act which are applicable to their own
actions and conduct.
A) craft
B) employee
C) employer
D) trade - CORRECT ANSWER✔✔B) employee
, Page 2 of 31
Question: Lockout and tagging of circuits, control of hazardous energy, and achieving an
electrically safe work condition are among the safe ______ intended to assure worker, safety,
and health.
A) habits
B) happenings
C) ideas
D) work practices - CORRECT ANSWER✔✔D) work practices
Question: Per OSHA part 1926, Subpart C, the employer shall instruct each employee and the
recognition and avoidance of _____ conditions, and the regulations applicable to their work
environment to control or eliminate any hazards or other exposure to illness or injury.
A) abnormal
, Page 3 of 31
B) normal
C) safe
D) unsafe - CORRECT ANSWER✔✔D) unsafe
Question: OSHA part 1910 states that the lock shall be attached so as to _____ operation of
the disconnecting means unless one resort to undue or the use of tools.
A) allow
B) discourage
C) encourage
, Page 4 of 31
D) prevent - CORRECT ANSWER✔✔D) prevent
Question: OSHA part 1910 states that if a lock _____ be applied, or if the employer can
demonstrate that tagging procedures will provide a level of safety equivalent to that obtained
by the use of a lock, a tag may be used without a lock.
A) can
B) cannot
C) should not
D) will not - CORRECT ANSWER✔✔B) cannot
Q:OSHA defines a ______ as a device that utilizes a positive means such as a lock, either key or
combination type, to hold an energy isolating device in the safe position and prevent the
energizing of a machine or equipment.
