ESTUDYR
INTRODUCTION TO AMMUNITION (CERT) (AMMO-45) UPDATED
EXAM WITH MOST TESTED QUESTIONS AND ANSWERS | GRADED A+ |
ASSURED SUCCESS WITH DETAILED RATIONALES
1. Which statement differentiates bombs from artillery ammunition, rockets, and missiles?
A. Bombs are always inert.
B. Bombs have smaller explosive charges.
C. Bombs are launched from a weapon.
D. Bombs are not fired from a weapon.
Rationale: Bombs are typically delivered (dropped) rather than fired from a gun or
rocket system. That delivery distinction is the key differentiator.
2. Cartridges for shotguns and .50-caliber (and smaller) cartridges belong to which
ammunition category?
A. Large-caliber artillery ammunition
B. Tank ammunition
C. Small arms ammunition
D. Mortar ammunition
Rationale: Shotgun shells and cartridges up to .50 cal are classified as small arms
ammunition.
3. Ammunition pallets may be made from which of the following materials?
A. Wood, metal, or steel
B. Glass, fabric, or paper
C. Rubber, ceramic, or glass
D. Fiberglass only
Rationale: Pallets used for ammunition are commonly wood or metal (including steel);
these materials provide required strength and durability.
4. Which of the following is not a purpose of a pallet?
A. Protect cargo during handling
B. Provide a stable base for lifting
C. Allow stacking for storage/transport
D. To protect from lightning
Rationale: Pallets protect, stabilize, and facilitate handling/stacking; they are not
designed to protect cargo from lightning.
5. How are outer packs designed to be stacked?
A. In a single layer only
, ESTUDYR
B. Side by side and on top of each other
C. Only vertically, not side by side
D. Random orientation to prevent pressure points
Rationale: Outer packs are designed to be stacked both side-by-side and atop one
another in storage/transport, per packaging specifications.
6. Which of the following is a correctly formatted example of a National Stock Number
(NSN) you would identify on a package?
A. 1305015342702
B. 1305-01-534-2702
C. NSN/1305/01/534/2702
D. 1305.01.534.2702
Rationale: NSNs follow the 13-digit format with groups often shown as 4-2-3-4 digits
separated by hyphens (NIIN formatting).
7. Which marking is an example of a Department of Defense Identification Code (DODIC)
on an outer pack?
A. 1305-01-534-2702
B. L477
C. UN0168
D. DOT-E06816
Rationale: DODICs are short alphanumeric codes (e.g., L477) used to identify specific
ammunition types.
8. On rocket or missile outer packs, which marking indicates which end should be pointed
toward the direction of least hazard?
A. Hazard class icon
B. “Nose End” marking
C. Manufacturer’s logo
D. Batch number location
Rationale: “Nose End” markings (or equivalent arrows/end indicators) designate
orientation to minimize hazard during handling and storage.
9. Ammunition outer-pack markings always identify which of the following?
A. Required storage temperature only
B. Manufacturer’s country only
C. Ammunition type
D. The truck driver’s route
Rationale: Markings must clearly identify the ammunition type (and related data) for
safe handling and accountability.
INTRODUCTION TO AMMUNITION (CERT) (AMMO-45) UPDATED
EXAM WITH MOST TESTED QUESTIONS AND ANSWERS | GRADED A+ |
ASSURED SUCCESS WITH DETAILED RATIONALES
1. Which statement differentiates bombs from artillery ammunition, rockets, and missiles?
A. Bombs are always inert.
B. Bombs have smaller explosive charges.
C. Bombs are launched from a weapon.
D. Bombs are not fired from a weapon.
Rationale: Bombs are typically delivered (dropped) rather than fired from a gun or
rocket system. That delivery distinction is the key differentiator.
2. Cartridges for shotguns and .50-caliber (and smaller) cartridges belong to which
ammunition category?
A. Large-caliber artillery ammunition
B. Tank ammunition
C. Small arms ammunition
D. Mortar ammunition
Rationale: Shotgun shells and cartridges up to .50 cal are classified as small arms
ammunition.
3. Ammunition pallets may be made from which of the following materials?
A. Wood, metal, or steel
B. Glass, fabric, or paper
C. Rubber, ceramic, or glass
D. Fiberglass only
Rationale: Pallets used for ammunition are commonly wood or metal (including steel);
these materials provide required strength and durability.
4. Which of the following is not a purpose of a pallet?
A. Protect cargo during handling
B. Provide a stable base for lifting
C. Allow stacking for storage/transport
D. To protect from lightning
Rationale: Pallets protect, stabilize, and facilitate handling/stacking; they are not
designed to protect cargo from lightning.
5. How are outer packs designed to be stacked?
A. In a single layer only
, ESTUDYR
B. Side by side and on top of each other
C. Only vertically, not side by side
D. Random orientation to prevent pressure points
Rationale: Outer packs are designed to be stacked both side-by-side and atop one
another in storage/transport, per packaging specifications.
6. Which of the following is a correctly formatted example of a National Stock Number
(NSN) you would identify on a package?
A. 1305015342702
B. 1305-01-534-2702
C. NSN/1305/01/534/2702
D. 1305.01.534.2702
Rationale: NSNs follow the 13-digit format with groups often shown as 4-2-3-4 digits
separated by hyphens (NIIN formatting).
7. Which marking is an example of a Department of Defense Identification Code (DODIC)
on an outer pack?
A. 1305-01-534-2702
B. L477
C. UN0168
D. DOT-E06816
Rationale: DODICs are short alphanumeric codes (e.g., L477) used to identify specific
ammunition types.
8. On rocket or missile outer packs, which marking indicates which end should be pointed
toward the direction of least hazard?
A. Hazard class icon
B. “Nose End” marking
C. Manufacturer’s logo
D. Batch number location
Rationale: “Nose End” markings (or equivalent arrows/end indicators) designate
orientation to minimize hazard during handling and storage.
9. Ammunition outer-pack markings always identify which of the following?
A. Required storage temperature only
B. Manufacturer’s country only
C. Ammunition type
D. The truck driver’s route
Rationale: Markings must clearly identify the ammunition type (and related data) for
safe handling and accountability.
