AV TECHNOLOGIST TEST
A client requires a front projection system. What drawings should be
requested from the client to select the appropriate lens? - ANSWERS-
Reflected ceiling plans and elevations
Prior to conducting a needs analysis for a new project, a coworker
tells the AV designer what equipment package they know will work.
What should the designer do with this information? - ANSWERS-
Thank the coworker for their input, remind them that you still need to
conduct a needs analysis.
Which is of the following is TRUE of a decibel? - ANSWERS-It is a
ration of two numbers meant to represent the change from a
previously measured value to a newly measure value.
What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? - ANSWERS-
Maintenance log
When verifying a display system, which of the following should be
used to determine if it meets a specified contrast ratio? - ANSWERS-
Spot photometer
An owner representative contests an invoice that was mailed after an
emergency service call which had determined the problem was
"operator error". Which of the following is *least* likely to prevent
,this type of misunderstanding? - ANSWERS-Predetermine that there
is no need for service agreement given predicted mean time between
failure for a TV
After presenting a proposal to a client, confirming that all objections
are answered and that the final buying decision will be made at an
internal meeting, what is the next step? - ANSWERS-Communicate
regularly, until a decision is made
Preventative maintenance tasks and intervals are detailed in the
___________. - ANSWERS-Service agreement.
A customer reports that, after a water leak in their conference room,
the projector won't turn on. What should the service technician do
FIRST? - ANSWERS-Inspect each system component for water
damage
When installing an audiovisual system, a user connects a laptop to an
HDMI distribution amplifier with two monitors connected. The first
monitor shows the laptop screen without any difficulty, the second
monitor does not. The likely cause is - ANSWERS-EDID
It is important to consider polar patterns when______ - ANSWERS-
Selecting microphones for use at live events
Which connector, pictured below, is used for an SDI signal? -
ANSWERS-1st
, To minimize interference when running cables for microphone and
power from the rack to the room, it is MOST important to -
ANSWERS-specify a conduit with sufficient capacity to meet the fill
ratio requirements of the local authority having jurisdiction
The top view drawing is also know as a___ - ANSWERS-plan view
Which is NOT presented in the program report: - ANSWERS-Detail
list of equipment
The user guide for an audiovisual system should include: -
ANSWERS-Drawings and instructions on equipment operation
When striking a room after a live event, what is the BEST way to
ensure that nothing gets missed? - ANSWERS-Use a plan of action
and a set of checklists
Which phase comes first in a project? - ANSWERS-design phase
Daily maintenance of a wireless microphone system will most likely
included this activity: - ANSWERS-Checking battery life, and
replacing those which are low/dead.
Of the following, who's not required for a meeting to discuss an
internal audit of an existing AV system's security profile? -
ANSWERS-Manufacturer's representative that provided technical
sales assistance.
A client requires a front projection system. What drawings should be
requested from the client to select the appropriate lens? - ANSWERS-
Reflected ceiling plans and elevations
Prior to conducting a needs analysis for a new project, a coworker
tells the AV designer what equipment package they know will work.
What should the designer do with this information? - ANSWERS-
Thank the coworker for their input, remind them that you still need to
conduct a needs analysis.
Which is of the following is TRUE of a decibel? - ANSWERS-It is a
ration of two numbers meant to represent the change from a
previously measured value to a newly measure value.
What document provides a detailed record of all repairs and service
work associated with the Audio Visual systems? - ANSWERS-
Maintenance log
When verifying a display system, which of the following should be
used to determine if it meets a specified contrast ratio? - ANSWERS-
Spot photometer
An owner representative contests an invoice that was mailed after an
emergency service call which had determined the problem was
"operator error". Which of the following is *least* likely to prevent
,this type of misunderstanding? - ANSWERS-Predetermine that there
is no need for service agreement given predicted mean time between
failure for a TV
After presenting a proposal to a client, confirming that all objections
are answered and that the final buying decision will be made at an
internal meeting, what is the next step? - ANSWERS-Communicate
regularly, until a decision is made
Preventative maintenance tasks and intervals are detailed in the
___________. - ANSWERS-Service agreement.
A customer reports that, after a water leak in their conference room,
the projector won't turn on. What should the service technician do
FIRST? - ANSWERS-Inspect each system component for water
damage
When installing an audiovisual system, a user connects a laptop to an
HDMI distribution amplifier with two monitors connected. The first
monitor shows the laptop screen without any difficulty, the second
monitor does not. The likely cause is - ANSWERS-EDID
It is important to consider polar patterns when______ - ANSWERS-
Selecting microphones for use at live events
Which connector, pictured below, is used for an SDI signal? -
ANSWERS-1st
, To minimize interference when running cables for microphone and
power from the rack to the room, it is MOST important to -
ANSWERS-specify a conduit with sufficient capacity to meet the fill
ratio requirements of the local authority having jurisdiction
The top view drawing is also know as a___ - ANSWERS-plan view
Which is NOT presented in the program report: - ANSWERS-Detail
list of equipment
The user guide for an audiovisual system should include: -
ANSWERS-Drawings and instructions on equipment operation
When striking a room after a live event, what is the BEST way to
ensure that nothing gets missed? - ANSWERS-Use a plan of action
and a set of checklists
Which phase comes first in a project? - ANSWERS-design phase
Daily maintenance of a wireless microphone system will most likely
included this activity: - ANSWERS-Checking battery life, and
replacing those which are low/dead.
Of the following, who's not required for a meeting to discuss an
internal audit of an existing AV system's security profile? -
ANSWERS-Manufacturer's representative that provided technical
sales assistance.
