CPSI - Certified Playground Safety Inspector

Circular use zone where swing motion occurs cannot overlap to a distance of________________. - Answer Y + 72" (y = vertical distance from the top of sitting surface to pivot point) The front and rear use zone where swing motion occurs cannot overlap for a distance of ______ to both the front and the rear. - Answer 2x x = the vertical distance from the protective surface to the pivot point of the swing. What is the handhold length of a seated rocking equipment ? - Answer min. length 3...

To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - Answer provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on - Answer a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material - Answer Critical height must equal or exceed fall height 4. When evaluating the structural integrity of a support structure for ...

accessible - Answer Relating to a part or portion of the playground equipment that (1) can be contacted by any body part (2) Is approachable or useable, or both, by persons with disabilities Accessible playground - Answer playground equipment area, that, when viewed in its entirety, may be approached and entered and provides a range of play opportunities and experiences to users of varying abilities Accessible route - Answer A pathway specifically designed to provide access for individual...

S Hook maximum opening - Answer 0.04 vertical projection gauge - thickness - Answer 0.12 roller slides - size of crush/shear test probe - Answer 0.19 merry go round (vertical rotating equipment) - size of crush / shear test probe - Answer 0.30 small projection gauge - inside diameter - Answer 0.50 crush and shear probe - size of opening with movement - Answer 0.62 flexible hand gripping components - minimum diameter - Answer 0.62 partially bounded opening probe (B) - minimum...

What was the first equipment recommended to be removed for safety reasons? - CORRECT ANSWER Giant Stride When was the first edition of the CPSI manual made? - CORRECT ANSWER1981 F 1292 - CORRECT ANSWER Method to test impact Attenuation of safety surfacing F 1951 - CORRECT ANSWER Method to test wheelchair accessibility on Safety Surfacing for Playgrounds. 51 sana F 2075 - CORRECT ANSWER Engineered wood fiber safety surfacing. 75 engineer F 2223 - CORRECT ANSWER Guide for ASTM stand...

What was the first equipment recommended to be removed for safety reasons? - CORRECT ANSWERGiant Stride When was the first edition of the CPSI manual made? - CORRECT ANSWER1981 F 1292 - CORRECT ANSWERMethod to test impact Attenuation of safety surfacing F 1951 - CORRECT ANSWERMethod to test wheelchair accessibility on Safety Surfacing for Playgrounds. 51 sana F 2075 - CORRECT ANSWEREngineered wood fiber safety surfacing. 75 engineer F 2223 - CORRECT ANSWERGuide for ASTM standards on Playgro...

Certification Course for Playground Safety Inspectors Exam Questions with Correct Answers 2023 [Revised] What was the first equipment recommended to be removed for safety reasons? - Correct Answers Giant Stride When was the first edition of the CPSI manual made? - Correct Answers 1981 F 1292 - Correct Answers Method to test impact Attenuation of safety surfacing F 1951 - Correct Answers Method to test wheelchair accessibility on Safety Surfacing for Playgrounds. 51 sana F 2075...

CPSI Exam Prep Questions and Answers (2022/2023) (Verified Answers) Circular use zone where swing motion occurs cannot overlap to a distance of________________. Y + 72" (y = vertical distance from the top of sitting surface to pivot point) The front and rear use zone where swing motion occurs cannot overlap for a distance of ______ to both the front and the rear. 2x x = the vertical distance from the protective surface to the pivot point of the swing. What is the handhold length of a s...

CPSI Exam Questions and Answers 100% Pass Without alternate means of egress, max. difference in height between stepped platforms for Pre-School age and School-Age Pre-School: 12 inches School-Age: 18 inches An access component is needed if the difference in platform height is more than __ for pre-school age and __ for school age. 12 inches and 18 inches Except for entrance/exit openings, the max. clearance opening without a top horizontal guardrail should be __. 15 inches Guardrail/Barrier i...

CPSI Exam Prep Questions and Answers (2022/2023) (Verified Answers) Circular use zone where swing motion occurs cannot overlap to a distance of________________. Y + 72" (y = vertical distance from the top of sitting surface to pivot point) The front and rear use zone where swing motion occurs cannot overlap for a distance of ______ to both the front and the rear. 2x x = the vertical distance from the protective surface to the pivot point of the swing. What is the handhold length of a s...