Hand Tools

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Another name for a machinist's hammer ball-peen hammer A heavy-duty took used to drive posts or other large stakes sledgehammer Proper angle for the edge of a cold chisel 60 degrees A type of screw shown (square in a circle) Robertson A screw that has a sharp point at the base of its drive socket Reed and Prince How many sides on a hexagonal shape Six In what way is a spud wrenc...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 weight Ball peen hammers are classified by ________. deep grooves The cross-cut chisel is made with the cutting edge wiser than the body so it doesn't bind when chiseling ________. Improve grip and torque that can be applied to the screw. Torx and Robertson screws were developed to ________. Allen What type of wrench can also be used as a screwdriver? Using the button or lever on the handle...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 A _______ has a steel head and a handle made of steel, wood, or fiberglass. claw hammer Another Name for a _ is a machinist's hammer. ball peen Ball-peen hammers are used in -metalworking. -It has a flat face for striking and a round face for peening (rounding off) metal or rivets. A ___ is a heavy-duty tool used to drive posts or other large stakes. _sledge hammer - ____ are demolition to...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Socket Wrenches -Round metal sleeve with a square opening in one end for insertion of a handle, for the purpose of tightening or loosening a nut or bolt -Available in 6- and 12-point openings socket handles Provides the means to turn the socket using many different types of handles Ratchet Used for speed and convenience in places where a full turn cannot be made Hinge Handle Longest and stronges...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 what clamping position should be considered when mounting a vise on a workbench? the vise should be positioned so that a long piece can be held vertically in the jaws without interference from the workbench name two types of bench vise the solid base and the swivel base types how is the machinist's bench vise measured for size? by the width of the jaws explain two characteristics of the insert ja...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 A toolmsker's vise __________. can be rotated and tilted to any desired position and can hold small precision parts When placing work in a vise, clamping action can be obtained by _______. using handle to turn the heavy screw Placing strips of _______ the width of the clamp jaw between the work and jaws will improve clamping action paper The plier size indicates the ______. overall length of the...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Carpenter's tool used to drive and pull nails. Claw hammer A common tool with a rubber head designed to protect the surface being struck. Rubber hammer A tool used to put in slotted screws. Flat or Slotted head screwdriver A tool used to put in cross-head screws. Phillips head screwdriver This screwdriver has a star-shaped tip that is useful for replacing such parts as tailgate lenses;it is...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 It is dangerous to use chisels that have ? Mushroomed heads. A cold chisels that has a mushroomed head can be reclaimed by? Grinding to original shaft contour. Why should file handles be on files? They reduce the risk of injury. A split hammer handle is best repaired by? Removing and replacing it. The safest way to use a wrench is to? Pull on it with steady pressure. What is the purpos...

Intro To Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Machinist's hammer Ball-peen hammer Sledgehammer A heavy duty tool used to drive posts or other large stakes is a ________ 60 degrees The proper angle for the edge of a cold chisel is ________ Robertson The square type of screw(pic) Reid and Prince What screw is relatively sharp point at the base of its drive socket? Six Hexagonal means how many sides Spud wrench has sm...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 The two basic measuring tools most often used by the carpenter are the ___ and the ___ flexible measuring tape and the folding wood tape rule the measuring tool being used to mark a rafter is called a ___ or a ___ quick square or a speed square Name three basic types of handsaws used by carpenters A. Back Saw B. Crosscut Saw C. Dry Wall Saw The tooth size of a handsaw is specified by listing the p...