My Woodshop Safety

Woodshop Safety Test Exam Questions With Answers Attitude Horseplay will not be tolerated. This is evidence of poor safety attitude. Keep your mind on your work. Respect the rights of others and their property. Clothing and Protective Equipment Wearing jewelry or loose clothes in the lab is dangerous. Long hair should be tied back or worn under a cap to avoid getting it caught in the machinery. Covered toe shoes or boots with rubber soles should be worn. Always wear proper eye prote...

Woodshop Safety Test Exam Questions With Answers If the instructor is out of the room, all power tools and machines must be ________ off Adjustments on all power tools and machines must be made before turning on the _________ machine, power In case you receive an injury, report it to your ____________ teacher Eye protection is required when operating or observing in close proximity all power activated ____________ machines When working at the shop tables, all work must b...

Woodshop Safety Test Exam Questions With Answers Power Drill Used for drilling holes and setting screws. Table Saw Used to rip wood. Miter Saw Used for cross cuts and finish cuts. What is the Band Saw used for? For making curved cuts. What are the do's of woodshop safety? Tie back long hair and loose clothes, remove all dangling jewelry, do your own work, stay on task, complete your project, ask for help, etc. What are the don'ts of woodshop safety? No horseplay...

Woodshop Safety Test Questions With Verified Answers Safety instructions must be given before you are allowed to work on or operate any machine or _______ tool you are not permitted to work on any equipment or machine if the ______ is not present instructor guards and safety device must be on all machines during _____ operation machinery must not be oiled or adjusted while in ____ use a machine must be started and stopped only by the _____ operator do not leave a m...

My Woodshop Safety Exam Questions With Answers Name the machine used to cut lumber parallel to the grain Table saw Where should the saw be before starting a cut on the radial arm saw? Behind the fence Where should your hands be and what should they be doing while making a crosscut on the radial arm saw? Your hands should never be in the path of the blade, while making a cut your left hand should hold the stock firmly against the fence at least 6 inches from the blade. Your right h...